Antari FT-250 Fog Hose 12.7 cm diameter × 3 m length (MPN 51702978)

The Antari FT-250 fog hose is a flexible ducting accessory with a 12.7 cm (127 mm) internal diameter and a 3 m length, made to route fog or haze output from compatible fog machines to a remote emission point. It enables repositioning of the machine away from the visible output location, provides more controlled dispersion of fog, and allows equipment to be hidden or placed in safer locations while maintaining effective atmospheric effects for stage, event, and film environments.

Advantages

The hose's 12.7 cm internal diameter supports high-volume fog flow while minimising back-pressure on the machine, and the 3 m length offers a practical balance between reach and manageable handling. Constructed for compatibility with Antari-style output ports and similar professional fog equipment, the ducting facilitates flexible placement of machines and helps direct effects precisely where required without modifying the fog generator itself.

Suitable for

• Stage and theatre setups where the fog output must be relocated away from the machine
• Live events and concerts requiring directed or remote fog emission
• Film and video shoots needing controlled fog placement while hiding machines from camera view
• Temporary installations and rentals where quick connection and disconnection are needed

When it may not be suitable

This fog hose is intended as a passive duct for directing aerosol output and does not contain built-in heating, active airflow generation, or filtration. It may not be suitable when very long runs, complex ducting with multiple bends, or active air-moving solutions are required to push fog over extended distances, as excessive length or sharp bends can reduce output density at the exit.

Key specifications

• Internal diameter: 12.7 cm (127 mm)
• Length: 3 m
• Material: flexible, heat-resistant ducting (compatible with fog and haze aerosols)
• Compatible with: professional fog and haze machines with matching or adaptable output ports
• Function: passive fog/haze transport and directional dispersion

How to use

Attach one end of the hose securely to the fog machine's output nozzle or adapter so there is a snug, leak-minimising fit. Route the hose to the desired emission point, avoiding tight kinks or sharp bends that could impede flow. If necessary, use clamps or brackets to support the hose along its run and prevent sagging. Operate the fog machine according to its instructions and check the outlet for even dispersion; shorten or reposition the hose if output density is lower than expected.

What to consider before purchase

• Ensure the 12.7 cm internal diameter matches your machine's output or that you have a suitable adapter
• Confirm that a 3 m length is sufficient for your intended placement and that routing will avoid sharp bends
• Check material compatibility with the fog fluid and operating temperatures of your machine
• Verify mounting or support needs for the hose run in your venue or installation

Usage recommendations

Use the Antari FT-250 fog hose for short to medium-distance routing where concealment or precise placement of fog output is required. Keep runs as straight and short as practical, support the hose to prevent kinks, and inspect connections for tight fit to maintain consistent output density.