DLP resin AnyCubic SDHLWH-104C White 1 kg

AnyCubic Craftsman DLP Resin (White) is a photosensitive resin formulated for DLP 3D printers where high detail and long shelf life are required. The material contains nano-ceramics to improve light scattering and reduce shrinkage, making it suitable for fine components, collectible figures and precise technical prototypes. The resin offers an extended shelf life of up to 1.5 years and is optimized for reliable, high-quality prints.

Advantages

The Craftsman resin features an innovative nano-ceramic composition that provides better internal light scattering and lower dimensional shrinkage compared with many standard resins. This results in greater surface smoothness and improved detail fidelity. Faster cure times enable higher printing throughput: the initial exposure can be as short as 35 seconds with subsequent layers curing in about 2 seconds per layer. The product combines durability and consistent mechanical properties for professional applications.

Key specifications

• Manufacturer: AnyCubic
• Model: Craftsman
• Color: White
• UV wavelength: 365–405 nm
• Density: 1.15–1.20 g/cm³
• Viscosity: 150–250 cP at 25°C
• Surface hardness: 82 HD
• Tensile strength: 35–50 MPa
• Elongation at break: 8%–12%
• Shrinkage during forming: 3.72%–4.2%
• Bending strength: 50–70 MPa
• Flexural modulus: 1,200–1,600 MPa
• Shelf life: 1.5 years

How to use

Use AnyCubic Craftsman resin in DLP printers compatible with a 365–405 nm UV source. Before printing, gently agitate the bottle and, if necessary, filter the resin to remove any impurities. Set the printer exposure settings close to the manufacturer recommendations: initial exposure ~35 seconds and subsequent layer exposure ~2 seconds, then adjust based on your printer and ambient conditions. After printing, rinse parts in isopropyl alcohol, remove supports, and perform a final UV post-cure to achieve declared mechanical properties. Store unopened resin in a cool, dark place and reseal the bottle after use.

Recommendations

For best results, perform test prints to fine-tune exposure times for your specific DLP printer and maintain recommended safety practices: use gloves and eye protection, ventilate the workspace, and dispose of waste resin according to local regulations.