Washing and curing system AnyCubic Wash & Cure 3 Max – AnyCubic WC3M-IP-O for post-processing resin 3D prints

The Anycubic Wash & Cure 3 Max is a combined washing and curing system for resin 3D prints, designed to handle large models and batches with a spacious 14.9 L working chamber. It supports models up to 300 × 165 × 300 mm and build platforms with a diagonal up to about 13.6 inches, offering an integrated workflow that reduces manual handling and operating costs.

Advantages

The device uses a dual-wash system (spray and immersion) to remove resin residue from surfaces and hard-to-reach details while reducing alcohol consumption. A rotating 360° curing platform provides uniform exposure with a high curing intensity, and One-click Washing and Curing automates the process to minimize user interaction. Smart diagnostics and an intuitive control panel simplify operation and error detection.

Suitable for

• Large single prints up to 300 × 165 × 300 mm
• Batch processing of multiple resin prints
• Users seeking reduced alcohol use and lower operating costs
• Workflows that benefit from automated wash-and-cure cycles

When it may not be suitable

The unit is intended for resin (SLA/DLP/LCD) prints; it is not designed for FDM/filament parts. Very small hobby tasks that require only occasional spot cleaning may not justify the size and capacity of this system. Also, if you need features beyond standard wash-and-cure functions (for example, solvent recycling systems beyond the included filtration), additional third-party solutions might be required.

Key specifications

• Working capacity: 14.9 L
• Maximum model size: 300 × 165 × 300 mm
• Build platform support: platforms up to ~12 inches and up to 2.2 kg
• Alcohol consumption per cycle: <50 ml
• Curing intensity: 25,000 µW/cm²
• Device weight: 13.5 kg
• Device dimensions: 434 × 434 × 556 mm

How to use

Place printed resin parts into the wash tray, add cleaning liquid to the detergent container, and choose the wash mode—spray, immersion, or a combination—then start the One-click Washing and Curing cycle. After washing, the platform automatically rotates during the curing stage to expose all sides evenly under the specified curing intensity. Monitor the process via the control panel and follow the user manual for recommended cycle times and safety precautions when handling isopropyl alcohol and uncured resin.

What to consider before purchase

• Intended print dimensions and whether 300 × 165 × 300 mm capacity meets your needs
• Compatibility with your resin printer’s build platform size and weight
• Workspace size to accommodate device dimensions (434 × 434 × 556 mm)
• Requirements for isopropyl alcohol handling, ventilation, and safe disposal

Usage recommendations

For consistent results, use clean isopropyl alcohol of recommended concentration, follow manufacturer cycle times for both washing and curing, and perform regular maintenance such as replacing the container filter and monitoring liquid levels via the device diagnostics.