PDU Power Strip APC SMART DN-IP2-V3 with IEC 60309 16A plug, 18×C13 10A and 6×C19 16A sockets

APC SMART DN-IP2-V3 is a rack-mountable PDU (power distribution unit) with an IEC 60309 16A/250V input plug and a mixed set of IEC output sockets designed for data center and IT rack installations. The unit supplies socket-level distribution through 18 C13 outlets rated at 10A/250V and 6 C19 outlets rated at 16A/250V, enabling connection of servers, switches, storage devices and other rack equipment that use standard IEC power leads. The device is intended for structured rack power delivery where a combination of lower-current and higher-current IEC connections is required.

Advantages

The PDU combines a compact rack form factor with a mixed-output configuration to minimize the need for additional adapters or separate power strips. Having both C13 and C19 sockets on the same unit simplifies cabling and allows simultaneous deployment of peripheral devices with different current requirements. The IEC 60309 16A input plug supports reliable single-phase power feed suitable for many IT rack power feeds. The construction is suitable for repeated rack mounting and secure retention in standard server cabinets.

Suitable for

• Powering server blades, rackmount servers and storage arrays with IEC C13 and C19 connections
• Supplying network switches, routers and patch panels in rack enclosures
• IT closets and edge racks where mixed-current IEC outlets are needed
• Consolidating multiple IEC-powered devices onto a single rack PDU

Key specifications

• Input: IEC 60309 16A, 250V single-phase
• Outputs: 18 × IEC C13 sockets rated 10A, 250V
• Outputs: 6 × IEC C19 sockets rated 16A, 250V
• Form factor: Rack-mountable PDU suitable for standard server cabinets
• Use environment: Data center, server room, network rack

How to use

Install the PDU in a standard 19-inch rack using appropriate mounting brackets or rails. Connect the IEC 60309 16A input plug to a compatible upstream power source or distribution feed rated for the required current and voltage. Attach equipment power cords to the C13 and C19 outlets according to the devices’ rated current. Arrange cabling to avoid strain on connectors and to maintain airflow in the rack. Monitor load per outlet group to ensure combined consumption does not exceed upstream supply capacity.

Usage recommendations

Verify that the upstream power feed and branch protection are rated for 16A before connecting the PDU. Distribute high-draw devices between C19 outlets and, where possible, balance loads across available circuits. For installation in critical environments, use proper grounding, secure mounting and consider remote monitoring or integration with rack management systems if required by your infrastructure.