UPS APC Smart-UPS SMT3000IC, Line-Interactive 3000VA (2700W), 8×C13 + 1×C19, USB, SmartConnect

The APC Smart-UPS SMT3000IC is a line-interactive tower UPS providing 3 kVA (2700 W) of output power and nine AC outlets (8 × IEC C13 and 1 × IEC C19). It uses a sealed lead‑acid (VRLA) internal battery with a user-replaceable battery cartridge (RBC55) and includes USB connectivity, SmartConnect remote monitoring, and an IEC C20 input. The UPS delivers pure sine wave power to support critical IT equipment during power disturbances, offers surge protection against lightning and voltage spikes, and is designed for business IT environments to maintain uptime and data integrity.

Advantages

The SMT3000IC supplies emergency power instantly when mains fail and can trigger an orderly shutdown of connected servers or a PC using the free APC PowerChute software or PowerChute Network Shutdown when combined with a network management card. SmartConnect enables out-of-box cloud-based remote monitoring and firmware updates. The unit supports phased startup and remote reboot via Switched Outlet Groups, includes an LCD and physical buttons for local control, and features a replaceable internal battery cartridge to extend service life without powering down connected equipment.

Suitable for (tasks / use cases)

• Protecting small to medium servers, network switches and storage in business environments
• Maintaining uptime for critical workstations and office IT infrastructure
• Remote power monitoring and management via APC SmartConnect or EcoStruxure IT
• Graceful shutdown of physical and virtual servers when used with network management card and PowerChute Network Shutdown

Key specifications

• Model: APC Smart-UPS SMT3000IC
• Output power capacity: 3 kVA / 2700 W
• AC outlets: 8 × IEC 320 C13, 1 × IEC 320 C19 (total 9)
• Input: IEC 320 C20; includes BS1363A and Schuko CEE 7/EU1-16P power cables
• Battery type: sealed lead‑acid (VRLA), user-replaceable cartridge (RBC55)
• Typical runtime: ~5.1 min at full load, ~17.2 min at half load (manufacturer typical values)
• Connectivity: USB, SmartConnect Ethernet port, optional Network Management Card (AP9640/AP9641)
• Management: APC PowerChute Serial/Network software, EcoStruxure IT compatibility
• Weight: 52.5 kg

How to use

Place the UPS in a ventilated, stable location near the protected equipment and the AC input. Connect critical devices to the IEC C13 and C19 outlets and the UPS input to mains using the supplied power cable. For local monitoring and settings use the front-panel LCD and buttons. Connect one server by USB to enable automatic shutdown via PowerChute Serial Edition, or install the optional Network Management Card to enable remote SNMP management and PowerChute Network Shutdown for multiple servers and virtual machines. Register and enable SmartConnect to allow cloud-based remote monitoring and firmware updates.

Usage recommendations

For reliable operation, replace the internal battery cartridge (RBC55) before end-of-life, test the UPS periodically, and extend SmartConnect access with the appropriate APC plan when remote monitoring is required beyond the free trial. Consider the APC service pack for extended warranty coverage of the unit and battery.