UPS APC Smart-UPS On-Line SRT3000XLI

The APC Smart-UPS On-Line SRT3000XLI is a double-conversion online UPS delivering clean, continuous power for critical IT equipment. With 3 kVA (2700 W) output capacity, 10 AC outlets (8× C13 and 2× C19) and a sealed lead‑acid battery, it supports short-term backup and can be extended with external battery packs (SRT96BP) to provide longer runtimes. The unit offers a tiltable graphic LCD for local monitoring, internal bypass for higher availability, and optional network management via an APC Network Management Card for remote monitoring and orderly shutdown.

Advantages

The SRT3000XLI uses double conversion technology to maintain uninterrupted, pure sine wave output, protecting connected devices from outages and power disturbances. Internal bypass and input power factor correction improve availability and extend equipment lifespan. Hot‑swappable internal battery cartridge enables safe replacement without powering down connected loads. Optional external battery packs and switched outlet groups allow runtime extension and phased start‑up or selective reboot of loads. Network management support enables remote monitoring and automated, controlled shutdowns to prevent data loss.

Suitable for

• Server rooms and small data centers
• Network switches, storage and critical IT infrastructure
• Virtualized environments and HCI clusters requiring graceful shutdown
• Business continuity setups where extended runtime via external batteries is needed

Key specifications

• Model: APC Smart-UPS On-Line SRT3000XLI (MPN: SRT3000XLI, EAN: 731304317678)
• Output power: 3 kVA / 2700 W
• Battery type: sealed lead‑acid (internal cartridge APCRBC152), 505 VAh
• Typical runtime: ~4 minutes at full load (extendable with SRT96BP external packs)
• AC outlets: 10 (8× IEC 320 C13, 2× IEC 320 C19)
• Input connectors included: BS1363A, Schuko (CEE 7/EU), IEC 60320 C20
• Form factor: tower; weight: 31.3 kg; cable length: 2.44 m
• Warranty: 3 years factory (battery cartridge 2 years); extendable with APC service pack

How to use

Install the UPS in a stable, ventilated location and connect critical equipment to the designated outlets (C13/C19). For networked management, install the optional APC Network Management Card (AP9640/AP9641) into the SmartSlot and configure SNMP or EcoStruxure IT Expert for remote monitoring and shutdown. Use the tiltable graphic LCD and front buttons to view status, configure outlet groups and set basic parameters. To extend runtime, connect compatible external battery packs (SRT96BP). Replace the internal battery cartridge (APCRBC152) when indicated; the hot‑swap design permits replacement without powering down connected loads.

Usage recommendations

Place the UPS on a level surface with adequate airflow, regularly verify firmware and PowerChute software updates, test shutdown sequences after network card installation, and plan battery replacements according to runtime requirements and manufacturer guidelines to maintain availability and prevent data loss.