Wall Bend Arangül 25 mm x 1/2" F — pipe fitting for PE plumbing connections

Wall Bend Arangül 25 mm x 1/2" F is a plumbing fitting designed to connect 25 mm polyethylene (PE) pipe to a 1/2" female threaded fixture. Intended for wall installations, the fitting provides a right-angle change of direction and a threaded connection for valves or appliances. Made from PE-compatible materials, it is suitable where a compact, secure transition from PE pipe to threaded components is required in water supply and low-temperature heat transfer systems.

Advantages

The Wall Bend is lightweight, flexible and chemically resistant thanks to its PE-compatible construction, offering long service life and reduced risk of brittle failure at low temperatures. It enables a secure threaded connection between PE piping and standard 1/2" female fittings while keeping a compact profile suitable for wall-mounted installations. The design supports applications in potable water distribution and low-temperature heating circuits.

Suitable for

• Connecting 25 mm PE pipe to 1/2" female threaded valves or fixtures
• Wall-mounted water supply installations
• Low-temperature heat transfer systems (e.g., underfloor heating feed lines)
• Irrigation and sprinkler connections

Key specifications

• Model: Wall Bend Arangül 25 mm x 1/2" F
• Pipe connection: 25 mm PE
• Threaded connection: 1/2" female
• Brand: Arangül
• MPN: 9093054
• EAN: 4750959093054

How to use

Prepare the 25 mm PE pipe by cutting it squarely and deburring the end. Insert the pipe into the fitting according to the manufacturer’s recommended joining method for PE (e.g., electrofusion or appropriate mechanical connector) ensuring the correct insertion depth. Tighten the 1/2" female threaded connection to the mating valve or fixture using appropriate thread sealant or tape if required. Mount the assembly to the wall as needed, confirming alignment and support to avoid stress on the joint.

Usage recommendations

Use compatible joining methods and follow local plumbing codes. Verify material compatibility with the specific PE pipe used and avoid exposing the fitting to temperatures or pressures outside the pipe system’s rated limits. For sealed threaded joints, apply suitable thread sealant and test the system for leaks before putting into regular operation.