Laminator ARGO Vision G50 (model 310320) A3 hot/cold, 80–150 µm, 480 mm/min, black

ARGO Vision G50 (model 310320) is an A3 laminator designed for straightforward protection of documents, photos and ID cards. The unit supports both hot and cold lamination modes and accepts pouches with film thicknesses from 80 to 150 µm. With a laminating speed of 480 mm/min and a compact footprint, this laminator is suitable for office or home use where occasional to moderate laminating tasks are required.

Advantages

The laminator offers dual-mode operation (hot and cold) enabling work with heat-sensitive materials as well as standard thermal pouches. Its compatibility with A3 format pouches accommodates larger documents and multi-page sheets. A consistent laminating speed of 480 mm/min ensures even lamination while reducing the likelihood of bubbling or misalignment. The device’s simple controls and compact design make it easy to store and operate without specialised training.

Suitable for

• Protecting A3 documents, posters and certificates
• Laminating photographs and ID cards
• Preserving instructional sheets, menus or signage
• Home office and small office laminating tasks

Key specifications

• Supported document size: up to A3
• Modes: hot lamination and cold lamination
• Acceptable pouch thickness: 80–150 µm (film thickness)
• Laminating speed: 480 mm/min
• Colour: black

How to use

Place the document inside a suitable pouch and align edges carefully. Select the desired mode depending on the pouch type and material—use hot mode for thermal pouches and cold mode for heat-sensitive items. Allow the laminator to reach operating temperature if using hot lamination, then feed the sealed edge of the pouch into the entry slot, keeping the document straight as it is pulled through. Once the laminated item exits the machine, lay it flat for a short time to cool and stabilise the film surface.

Usage recommendations

Use pouches within the supported thickness range (80–150 µm) and suitable A3 dimensions to ensure consistent results. When laminating heat-sensitive media or items with adhesive elements, use the cold mode. For best results with hot lamination, allow the device to preheat fully and feed pouches straight to avoid creases or trapped air.