Wall Speaker Audac WX502 2-way Wired 50 W, 2 drivers, 55–20000 Hz, 8 Ω, 87 dB, White

Audac WX502 is a wired 2-way wall speaker delivering 50 W RMS with a 1" dome tweeter and a 5.25" low-frequency driver. The speaker covers a frequency range of 55–20,000 Hz, has an impedance of 8 Ω and a sensitivity of 87 dB. Housed in an elegantly shaped synthetic ABS enclosure and supplied with a steel mounting bracket, the WX502 is designed for commercial and residential audio installations where clear mid/high reproduction and reliable low-mid response are required for background music, paging and foreground sound.

Advantages

The WX502 combines two dedicated drivers to provide high-fidelity reproduction of music and speech while maintaining consistent performance across its specified frequency range. Its ABS cabinet and steel mounting bracket allow flexible horizontal or vertical mounting and directional focusing. An integrated protection network safeguards the tweeter against overload and the updated terminal block and additional 4-pin connections simplify installation and daisy-chaining in multi-speaker setups. The unit is available in a white finish that integrates unobtrusively into many indoor environments.

Suitable for

• Background music in retail, hospitality and office spaces
• Paging and voice announcements in public buildings
• Foreground sound for meeting rooms and small event areas
• Fixed installations in residential interiors requiring wall-mounted speakers

Key specifications

• Design: 2-way wall speaker with separate tweeter and woofer
• Power rating: 50 W RMS
• Drivers: 1" dome tweeter and 5.25" low-frequency driver
• Frequency response: 55–20,000 Hz
• Nominal impedance: 8 Ω (also configurable for 100 V PA systems via power taps at 40 W, 20 W and 10 W)
• Sensitivity: 87 dB
• Enclosure material: acrylonitrile butadiene styrene (ABS)
• Finish: white
• Mounting: supplied steel bracket for horizontal and vertical installation and directional adjustment

How to use

Mount the WX502 on a suitable wall surface using the supplied steel bracket, selecting horizontal or vertical orientation and adjusting the bracket to aim the speaker toward the listening area. Connect the speaker to an amplifier or public address system using the terminal block; for daisy-chaining multiple units use the additional 4-pin connection terminals. Choose the appropriate connection mode: direct 8 Ω wiring for standard low-impedance systems or select a 100 V tap (40 W, 20 W or 10 W) if integrating into a constant-voltage PA network. Verify polarity and secure all wiring before powering the system.

Usage recommendations

Position speakers to avoid close proximity to large reflective surfaces for clearer mid/high detail and maintain sufficient distance from HVAC outlets and other noise sources. For even coverage in larger areas, use multiple WX502 units with careful level calibration from the central amplifier or mixer and select the 100 V taps when long cable runs or multiple parallel speakers are required.