Wi‑Fi switch module Avatto WSM16 230Vac 3A — smart relay module for remote control

Avatto WSM16 is a Wi‑Fi switch module designed for integration into 230Vac electrical circuits with a maximum switching current of 3A. The compact smart relay module enables remote control of lighting and small household appliances through a local Wi‑Fi network or compatible smart‑home applications. Intended for retrofit installation in switch boxes and junctions, the unit supports basic on/off switching and scheduling features to automate circuits without replacing existing switches.

Advantages

The Avatto WSM16 offers a compact footprint and direct integration into existing installations, allowing remote control without extensive rewiring. Its support for standard 230Vac supply and a 3A switching limit makes it suitable for many lighting loads and low‑power appliances. Built‑in Wi‑Fi connectivity provides control via a home network and compatible apps, while scheduling functions enable timed operation. The module’s design is intended for installation inside switch boxes or junctions to preserve existing switch hardware and reduce visible changes.

Suitable for

• Remote switching of LED and incandescent lighting within the 3A current limit
• Control of small appliances and loads that do not exceed 3A
• Retrofit installations in wall switch boxes and ceiling junctions
• Home automation scenarios requiring on/off control and scheduling

Key specifications

• Supply voltage: 230Vac
• Maximum switching current: 3A
• Functionality: on/off switching and scheduling via Wi‑Fi
• Connectivity: Wi‑Fi integration with home network and compatible smart‑home apps
• Form factor: compact module suitable for installation in switch boxes and junctions

How to use

Install the Avatto WSM16 inside a standard switch box or junction following local electrical codes and safety practices. Connect the module to the 230Vac supply and the controlled load according to the wiring diagram supplied by the manufacturer, ensuring the load does not exceed the 3A limit. After powering the module, connect it to the local Wi‑Fi network and configure it using the compatible smart‑home application to enable remote on/off control and to set schedules. Verify correct operation of the connected load and that the module is placed where heat dissipation and access for maintenance are adequate.

Usage recommendations

Do not connect loads that exceed the 3A rating; for inductive or high‑inrush devices verify suitability before installation. Ensure installation is performed by a qualified person and that the module is mounted in an enclosure that complies with local safety standards.