AWTOOLS AW57131 car polisher accessory

AWTools AW57131 car polisher accessory is a polyurethane foam polishing pad mounted on a plastic backing with an M14 threaded connection. Weighing 120 g, the pad is designed for polishing and buffing varnish finishes on automotive surfaces. The open-cell foam structure retains water, which absorbs heat generated during polishing and helps control surface temperature to reduce the risk of heat damage. The accessory is compatible with angle grinders and drills and is intended for use with low-abrasion polishing pastes and polishing milks.

Advantages

The polyurethane foam provides a balance between flexibility and firmness for even contact with curved and flat panels. The water-retaining sponge structure contributes to thermal management during extended polishing operations. A plastic backing ensures secure mounting to tools that accept an M14 threaded pad, and the overall light weight supports comfortable handling during longer tasks. The pad's compatibility with low-abrasion compounds makes it suitable for finishing and enhancing gloss without aggressive material removal.

Suitable for

• Polishing and buffing varnish and clearcoat finishes on cars
• Removing light swirls and enhancing gloss with low-abrasion pastes
• Use on curved panels and flat surfaces
• Attachment to angle grinders and drills with an M14 threaded connection

Key specifications

• Material: polyurethane foam on plastic backing
• Thread type: M14 threaded connection for tool mounting
• Weight: 120 g
• Foam structure: open-cell capable of retaining water for heat absorption
• Compatibility: suitable for use with low-abrasion polishing pastes and polishing milks
• Tool compatibility: designed for angle grinders and drills

How to use

Securely mount the polishing pad onto the tool using the M14 threaded connection, ensuring it is tight and correctly centered. Dampen the pad lightly with water if temperature control is desired, then apply a small amount of a low-abrasion polishing paste or polishing milk to the pad or work surface. Operate the angle grinder or drill at a moderate speed appropriate for the compound and the surface condition, moving the pad in overlapping passes until the desired finish is achieved. Periodically check the pad for contamination, rinse or replace if necessary, and avoid excessive pressure to prevent overheating or surface damage.

Usage recommendations

For best results, use the pad with low-abrasion polishing compounds and keep the pad slightly damp to aid heat dissipation. Start on a small inconspicuous area to confirm compatibility with the clearcoat and adjust speed and pressure accordingly. Clean the pad after use and store it dry to preserve foam structure and performance.