Cable splitter Axing BAB 4-16P 5–1218 MHz 16 dB grey

Axing BAB 4-16P is a 4-way passive coaxial cable splitter designed for distribution of TV, satellite and cable signals across the 5–1218 MHz frequency range. The device provides 16 dB attenuation per branch to ensure signal separation between outputs while maintaining stable frequency response for domestic and small commercial installations. The housing is finished in grey and built for inline mounting within a wall-box or distribution cabinet where a compact, low-profile splitter is required.

Advantages

The splitter offers uniform per-branch attenuation of 16 dB, wideband operation from 5 to 1218 MHz, and passive operation that requires no external power. Its compact grey enclosure supports straightforward integration into existing coaxial networks and helps reduce interference between connected receivers. Designed for reliability, the unit minimises signal crosstalk and preserves the integrity of incoming RF signals across the supported frequency band.

Suitable for

• Distributing terrestrial and cable TV signals to multiple receivers in a home
• Small commercial installations requiring passive splitting of coaxial signals
• Inline installation in distribution cabinets or wall-boxes
• Systems where fixed attenuation and isolation between outputs are needed

Key specifications

• Frequency range: 5–1218 MHz
• Number of outputs: 4
• Per-branch attenuation/isolation: 16 dB
• Device type: passive coaxial splitter
• Enclosure colour: grey

How to use

Connect the incoming coaxial feed to the splitter input and attach each receiver or downstream cable to the four output ports using appropriate F-type connectors. Ensure all connectors are properly tightened to maintain good contact and minimise signal loss. Place the splitter inside a wall-box or distribution cabinet, avoiding locations with high moisture or extreme temperatures. No external power source is required; after connections are made, check each receiver for proper signal level and quality and adjust downstream amplification if necessary.

Usage recommendations

For best results, use quality coaxial cable and F-type connectors, avoid long runs without amplification, and consider installing a line amplifier if signal levels are low after splitting. Keep the splitter in a dry, ventilated area and verify compatibility with the system's frequency requirements before installation.