Baks ring anchor bolt PSRM10X120 10×120 mm threaded expansion fastener 650753

Baks ring anchor bolt PSRM10X120 10×120 mm is a threaded expansion fastener designed for secure attachment in solid base materials. The fastener combines a closed ring head with an expanding sleeve that, when tightened, forms a mechanical anchor in concrete, brick or natural stone. This design provides a reliable anchoring point for lifting, securing loads or attaching fixtures where a robust, permanent connection to the substrate is required.

Advantages

The ring head allows for quick connection of ropes, cables or carabiners while maintaining a compact profile. The threaded expansion mechanism creates a strong radial grip inside drilled holes, ensuring stable load transfer to the base material. Constructed from corrosion-resistant metal, the fastener is suitable for indoor and some outdoor applications and provides consistent anchoring performance when installed according to recommended hole size and embedment depth.

Suitable for

• Suspended fixtures such as lights, signage and small equipment
• Temporary or permanent lifting points for ropes and slings
• Attachment of safety lines and fall-arrest anchors in non-life-safety applications
• Securing structural or finishing elements to concrete, brick or stone

Key specifications

• Threaded rod diameter: 10 mm
• Overall embedded length: 120 mm
• Anchor type: expansion sleeve with ring head
• Suitable base materials: concrete, solid brick, natural stone
• Material finish: corrosion-resistant metal (zinc or similar plating)

How to use

Drill a hole in the base material to the recommended diameter and depth, ensuring the hole is clean and free of dust. Insert the anchor bolt into the hole until the ring head sits flush with the surface. Tighten the nut or threaded component to activate the expansion sleeve; continue turning until the sleeve grips the substrate and the anchor is secure. Verify correct embedment and tightness before applying operational loads, and follow manufacturer torque guidelines if available.

Usage recommendations

Use the anchor only in appropriate solid base materials and verify load requirements for the intended application. Do not use this type of expansion fastener for critical life-safety fall-arrest systems unless it is specifically certified for that purpose. Inspect anchors after installation and periodically during service for corrosion, loosening or substrate damage; replace any compromised fasteners.