Angle profile Baks CC50H35/1,7MC — CC50H35 corner angle, 1.7 mm thickness

Baks CC50H35/1,7MC is an angle profile (corner angle) designed for construction and finishing work. The CC50H35 designation indicates the leg dimensions and the product is manufactured from sheet material with a nominal thickness of 1.7 mm. This profile provides edge protection, reinforcement and a clean, straight finish for internal and external corners in drywall, plaster, render and similar surfaces.

Advantages

The profile delivers mechanical protection to vulnerable corners and reduces damage from impacts and wear. Its precise right-angle form simplifies alignment and installation, ensuring a consistent, professional corner line without the need for extensive shaping on site. The 1.7 mm thickness offers a balance of rigidity and manageable handling, suitable for both manual fitting and machine-assisted cutting. The smooth outer face supports uniform plaster and paint application for a neat final appearance.

Suitable for

• Reinforcing and protecting interior drywall and plasterboard corners
• Finishing external and internal plaster or render edges
• Edge protection in corridors, stairwells and high-traffic areas
• Professional renovation and new-build finishing work

Key specifications

• Profile type: corner/angle profile with two perpendicular legs
• Leg dimensions: CC50H35 (standard right-angle leg lengths as indicated by the model)
• Material thickness: 1.7 mm
• Primary function: edge protection, reinforcement and finishing of corners
• Suitable substrates: drywall, plaster, cement render and similar building materials

How to use

Measure and cut the angle profile to the required length using appropriate metal-cutting tools, ensuring square, burr-free ends. Place the profile so both legs sit flush against the corner faces; fasten according to the substrate and site conditions, using suitable screws, nails, anchors or adhesive for metal profiles. Apply jointing compound or plaster over the profile flange, feathering onto the adjacent surfaces to create a continuous finish. Allow finishing materials to cure before sanding and painting.

Usage recommendations

For best results, verify substrate flatness and remove loose material before installation. Use corrosion-resistant fasteners in humid or external environments, and protect cut ends from corrosion if the profile material requires it. Follow standard safety precautions when cutting and fixing metal profiles, including eye and hand protection.