Vibration Isolation Underlay Baks SBV50x500 895501 – anti-vibration underlayment roll 50 mm x 500 mm

Baks SBV50x500 895501 is a vibration isolation underlay designed to reduce transmission of vibrations and structure-borne noise. Supplied as a 50 mm thick by 500 mm wide underlayment roll or strip, this anti-vibration material is intended for installation beneath machinery, equipment bases, HVAC units, and within flooring assemblies. The underlay supports improved acoustic comfort in industrial and commercial environments while helping to protect building structures from vibrational forces.

Advantages

The underlay provides consistent vibration attenuation across a broad frequency range and reduces structure-borne noise transfer to adjacent surfaces. Its 50 mm thickness offers a resilient bearing layer that compensates for minor surface irregularities and helps decouple equipment from the supporting structure. The roll format enables continuous coverage and straightforward cutting to required lengths for on-site installation.

Suitable for

• Isolation of rotating machinery and compressors
• Under HVAC units and fans to reduce transmitted vibration
• Installation beneath equipment bases and frames
• Acoustic improvement in raised or screeded flooring systems

Key specifications

• Material form: roll/strip underlay
• Thickness: 50 mm
• Width: 500 mm
• Function: vibration isolation and structure-borne noise reduction
• Typical applications: machinery mounts, HVAC supports, flooring isolation

How to use

Measure the area to be isolated and cut the underlay roll to the required length using a utility knife or appropriate cutting tool. Place the underlay directly beneath equipment bases, frames, or floor layers, ensuring full contact across the support surface and trimming around fixtures as necessary. For multiple strips, butt joints or overlapping may be used according to site requirements to achieve continuous isolation. Ensure the supporting substrate is clean and dry before installation to promote stable seating.

Usage recommendations

For optimal performance, match the underlay thickness and bearing area to the equipment footprint and static load. Verify load distribution and consider isolator pads or additional supports for concentrated loads. Periodically inspect the underlay for compression set or deterioration in aggressive environments and replace if necessary to maintain vibration attenuation.