Extension cord BESK 9027264, 10 m length, 3 conductors × 1.0 mm² cross-section

BESK 9027264 is a 10-meter extension cord with three conductors, each having a 1.0 mm² cross-section. The 3Gx1.0 mm² construction provides a flexible, grounded connection for supplying mains power to a variety of low-to-moderate power appliances and tools. The cable is intended to extend the reach of fixed outlets so devices can be positioned where needed without relocating sockets.

Advantages

The extension cord offers a continuous 10 m reach with three conductors that include an earth/ground conductor for safer use with earthed appliances. Its 1.0 mm² conductor cross-section is suitable for typical household and workshop devices that do not require heavy current. The cable’s flexible design simplifies routing and placement, while the straightforward construction keeps installation and storage simple.

Suitable for

• Powering household appliances at a distance from wall outlets
• Connecting light workshop tools and equipment
• Temporary outdoor use where the cable rating is appropriate
• Events, maintenance tasks, and general-purpose power extension

Key specifications

• Cable length: 10 m
• Conductors: 3 (including protective earth)
• Conductor cross-section: 1.0 mm² per conductor
• Construction: flexible 3-core mains cable

How to use

Unroll the extension cord fully before connecting appliances to ensure proper heat dissipation. Plug the cord into a compatible mains outlet and connect earthed devices to the socket. Avoid overloading the cable by checking the current requirements of connected appliances and comparing them to the cable’s suitability for low-to-moderate load devices. Inspect the cable for visible damage before each use and do not use if the insulation is compromised.

Usage recommendations

Use the extension cord on flat, dry surfaces and protect it from sharp edges and sources of heat. For outdoor or wet locations, confirm that the product’s rating and any connected plugs/outlets provide suitable protection; do not expose non-rated components to moisture. Store coiled neatly and avoid tight knots to preserve conductor integrity.