BLOW 3306# Satellite 3-way F-type splitter, passive coaxial signal splitter, model 3306#

BLOW 3306# Satellite 3-way F-type splitter is a passive coaxial signal splitter designed to distribute one satellite feed to three receivers or tuners. The unit features threaded F-type connectors for reliable mechanical and electrical connection to satellite LNB outputs and set-top box inputs. As a passive splitter, it divides the incoming RF signal without amplification, making it suitable for installations where the incoming signal strength is sufficient and no powered distribution is required.

Advantages

The splitter provides a simple and compact solution for sharing a single satellite feed between multiple devices while maintaining the standardized F-type connection format. Its passive design means no external power supply or active electronics are needed, reducing complexity and points of failure. Threaded connectors ensure secure attachment and stable signal transmission in home and small installation environments.

Suitable for

• Home satellite installations where one LNB output must feed up to three tuners or set-top boxes
• Small apartments or multi-room setups requiring signal distribution without amplification
• Temporary setups, testing, or diagnostic tasks where passive splitting is acceptable

Key specifications

• Type: Passive 3-way satellite splitter
• Connector type: Threaded F-type (female/male as required for feed and outputs)
• Frequency range: Designed for satellite RF bands (typical satellite downlink ranges)
• Signal handling: Passive split without active amplification
• Form factor: Compact inline coaxial splitter for easy installation

How to use

Connect the satellite LNB output to the splitter input using a suitable F-type coaxial cable with threaded connectors. Attach up to three coaxial cables from the splitter outputs to the inputs of your satellite receivers, tuners, or recorders. Ensure all connections are tightened securely by hand to maintain good contact; avoid overtightening with tools to prevent damaging the connector threads. Because the device is passive, verify that the incoming LNB signal level is adequate for simultaneous use by multiple receivers; if signal strength is marginal, consider using an amplified distribution solution.

Usage recommendations

Use short, high-quality coaxial cables and properly tightened F-type connectors to minimize insertion loss. If receivers are located far from the splitter or multiple splits are required, measure signal levels and consider an active distribution amplifier to preserve signal quality. Avoid exposing the splitter and coaxial connections to moisture; install in a dry, ventilated location to maintain long-term reliability.