Automotive headlight bulb BLOW 5048# H7 12V 55W

BLOW 5048# H7 12V 55W halogen headlight bulb is designed for standard vehicle headlamp fittings that accept H7 base lamps. The bulb provides conventional halogen illumination for low-beam or high-beam applications where a 12 V, 55 W H7 replacement is required. It fits standard H7 sockets and is intended as a direct-replacement lamp for compatible automotive lighting systems.

Advantages

This BLOW H7 halogen bulb delivers consistent light output at the rated 12 V and 55 W values, ensuring predictable performance in compatible headlamp reflectors and lenses. The single-filament design offers straightforward installation and electrical compatibility with standard H7 circuits. The bulb's construction follows typical halogen technology, providing a balance of brightness and service life appropriate for general road use.

Suitable for

• Replacement of H7 bulbs in passenger cars and light commercial vehicles
• Standard low-beam or high-beam headlamp fittings designed for 12 V, 55 W lamps
• Applications requiring a direct plug-in H7 halogen lamp without vehicle wiring modifications

Key specifications

• Type: halogen automotive headlight bulb
• Base: H7 single-filament socket
• Nominal voltage: 12 V
• Nominal power: 55 W
• Intended use: forward illumination in compatible vehicle headlamps

How to use

Ensure the vehicle ignition is switched off and the headlamp circuit is cool before handling the bulb. Access the headlamp housing according to the vehicle manufacturer's instructions, remove the protective cover if fitted, and disconnect the lamp connector. Remove the faulty H7 bulb from its holder and replace it with the BLOW H7 12V 55W bulb by aligning the base and securing it in the socket. Reconnect the lamp connector, replace any protective covers, and verify correct operation by switching the lights on and checking beam aim and alignment as required.

Usage recommendations

Handle the glass envelope only by the base or with clean gloves to avoid skin oils that can reduce bulb life. Do not touch the glass with bare hands. Replace bulbs in pairs when one side fails to maintain symmetrical illumination and beam pattern. Verify compatibility with the vehicle's headlamp reflector and local regulations regarding approved light sources.