Wall Mount Bracket BLOW 76-936# bent 38/400 mm

BLOW 76-936# bent 38/400 mm wall mount bracket is a metal support designed to secure compatible pipes, hoses or light equipment to vertical surfaces. The bracket has a bent profile that creates an offset from the wall, providing clearance for routed pipes or directional alignment needs. Its dimensions 38/400 mm define the mounting depth and usable arm length for installations where a reliable fixed mounting point is required.

Advantages

The bent design enables offset mounting that prevents direct contact between the wall and the attached item, reducing wear and allowing easier access for maintenance. Manufactured from metal, the bracket offers stable support and resistance to bending under typical service loads. The simple geometry and standard mounting footprint make it compatible with a range of pipe and hose diameters and with common wall-fixation methods.

Suitable for

• Mounting plumbing pipes and flexible hoses where clearance from the wall is needed
• Supporting small-diameter conduits or tubing in industrial or utility spaces
• Securing components that require directional offset from a vertical surface
• Applications in workshops, service rooms, and technical installations

Key specifications

• Bent bracket profile for offset mounting
• Arm length / depth: 400 mm
• Offset dimension: 38 mm
• Material: metal construction suitable for mechanical support
• Surface suitable for standard wall fixation with screws or anchors

How to use

Position the bracket on the vertical surface at the desired height and mark fixation points through the mounting holes. Use appropriate wall anchors or screws matched to the substrate material and expected load. Ensure the bracket is level before fully tightening fasteners. Place the pipe, hose or component onto the bracket arm and secure it with suitable clamps or straps if needed to prevent movement. Verify alignment and clearances after installation.

Usage recommendations

Choose fixings that match the wall type and the combined weight of the bracket and attached items. For outdoor or corrosive environments, use corrosion-resistant fasteners and consider a protective finish on the bracket. Regularly inspect mounting points and fasteners for signs of loosening or wear.