-
Serial interface type:
-
RS-232
-
Number of batteries supported:
The number of batteries that can be used with the product.
-
3
-
Serial ports quantity:
The number of serial ports in a computer or peripheral. A serial port is a serial communication physical interface through which information transfers in or out one bit at a time. The term "serial port" usually identifies hardware more or less compliant to the RS-232 standard, intended to interface with a modem or with a similar communication device. In modern computers and peripherals, serial ports have largely been replaced by USBs and other interfaces.
-
1
-
Battery recharge time:
Approximate time required to recharge the battery from completely empty to completely full
-
3 h
-
Emergency Power Off (EPO):
-
Yes
-
Output power capacity:
The maximum power that the device can produce.
-
1 kVA
-
Typical backup time at half load:
The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is half-loaded (50% of capacity).
-
11 min
-
Typical backup time at full load:
The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is fully loaded (100% of capacity).
-
4 min
-
AC outlets quantity:
The number of sockets in the device where AC electrical power can be connected.
-
4 AC outlet(s)
-
Input frequency:
The frequency (Hz) which is required to power the product.
-
40/70
-
Battery voltage:
The voltage (V) of the battery.
-
12 V
-
Power plug:
A power plug is a 2 or 3 pinned device that is placed into an electrical socket in order to make an electrical connection.
-
C14 coupler
-
Output power:
The power that the device can produce.
-
1000 W
-
Input current Total Harmonic Distortion (THD):
-
5 %
-
AC outlet types:
The type of outlet for AC electricity.
-
C13 coupler
-
Crest factor:
-
3:1
-
Battery capacity:
The amount of electric charge a battery can deliver at the rated voltage. The more electrode material contained in the cell the greater its capacity. A small cell has less capacity than a larger cell with the same chemistry, although they develop the same open-circuit voltage. Capacity is measured in units such as amp-hour (A·h).
-
7 Ah
-
Input operation voltage (max):
The maximum input voltage supported by the device.
-
300 V
-
Input operation voltage (min):
The minumum voltage needed by the device during operation.
-
160 V
-
Output operation voltage (min):
The minumum voltage produced by the device during operation.
-
200 V
-
Output operation voltage (max):
The maximum output voltage produced by the device.
-
240 V
-
ECO mode:
-
Yes
-
Input power factor:
-
0.99
-
Output power factor:
-
1
-
Waveform:
-
Pure sine
-
Output voltage regulation:
-
1
-
Serial interface:
-
Yes
-
UPS topology:
The two main UPS topologies are Double-Conversion True Online and Standby / Eco. Many quality-based considerations are involved when choosing the the optimal UPS for the job, like how they are coping with voltage disturbances.
-
Double-conversion (Online)
-
Emergency Power Off (EPO) connector:
-
Yes
-
USB port:
The device features a socket into which a USB cable can be plugged.
-
Yes
-
Built-in fan:
-
Yes
-
Efficiency (On-line mode):
-
89 %
