Car Wash Brush BRADAS 10" Single-Plane Soft Head ESS1945H

BRADAS Car Wash Brush with a 10" (approx. 25 cm) single-plane soft head is designed for gentle exterior cleaning of vehicles. The soft, dense bristles conform to curved surfaces and provide even contact with paintwork, rims and bumpers. The brush is intended for manual washing with water and automotive detergent and aims to reduce the risk of scratches while removing dirt, road film and light contaminants from vehicle surfaces.

Advantages

The single-plane soft head delivers uniform pressure across the cleaning surface, reducing localized abrasion. Soft synthetic bristles are gentle on paint and trim yet effective at lifting dirt and grime. The 10-inch head size balances coverage and control, allowing access to both broad panels and tighter areas such as around wheel arches and bumpers. The brush construction is lightweight for comfortable handling during routine washing.

Suitable for

• Hand washing car body panels and doors
• Cleaning rims, wheel arches and bumpers
• Removing light road contamination and dust
• Use with water and mild automotive detergents

Key specifications

• Head diameter: approx. 10 inches (25 cm)
• Head type: single-plane soft head
• Bristle material: soft synthetic fibers
• Intended use: manual exterior vehicle cleaning
• Compatibility: suitable for paint, plastic trim and metal surfaces when used correctly

How to use

Rinse the vehicle surface to remove loose debris before applying detergent. Prepare a wash bucket with water and an appropriate automotive soap. Wet the brush and apply detergent either directly to the brush or to the vehicle surface, then gently scrub in straight or overlapping strokes keeping the bristles flat against the surface. Rinse the brush and the cleaned area frequently to avoid trapping abrasive particles between bristles and surface. After washing, rinse the entire vehicle thoroughly and dry with a microfiber towel or air dry.

Usage recommendations

To minimise the chance of scratches, always use separate buckets for rinse and wash (two-bucket method), avoid circular scrubbing motions on painted panels, and inspect the brush for trapped grit before each use. Store the brush clean and dry, and replace it if bristles become misshapen or excessively worn.