Brush (wycior) Bratek 5298, 120 mm PVC shaft, for acid-resistant fittings

Bratek 5298 is a compact 120 mm cleaning brush with a PVC shaft, designed specifically for maintenance of acid-resistant fittings and small-diameter tubing. The brush head and shaft dimensions allow access to narrow passages, connectors and valve ports. Constructed from materials compatible with acidic environments, the tool supports routine cleaning tasks where chemical resistance and physical reach are required.

Advantages

The PVC shaft provides chemical resistance and dimensional stability in contact with acidic cleaning agents, while the 120 mm length offers better control and access in confined spaces. The brush is lightweight and easy to maneuver, allowing targeted cleaning of valves, nozzles and joints without applying excessive force. Its size and material selection reduce the risk of corrosion transfer to acid-resistant installations.

Suitable for

• Cleaning acid-resistant fittings and connectors
• Maintenance of small-diameter tubing and process lines
• Removing deposits from valve ports and nozzles
• Inspection and preparation of narrow passages before assembly

Key specifications

• Overall length: 120 mm
• Shaft material: PVC for chemical resistance
• Designed for use with acid-resistant fittings and tubing
• Compact size suitable for narrow connectors and small ports

How to use

Securely hold the PVC shaft and insert the brush gently into the fitting, tubing or valve port to be cleaned. Use controlled back-and-forth motions to dislodge deposits and move debris out of the passage. Rinse the brush and the cleaned component with an appropriate rinsing solution after use to remove loosened residues. Inspect the cleaned surface to confirm that deposits have been removed and repeat the operation if necessary.

Usage recommendations

Use compatible personal protective equipment and follow chemical handling guidelines when working with acidic cleaning agents. After cleaning, verify compatibility of rinse fluids with the installation materials and allow components to dry before reassembly.