Broadcom MegaRAID 9562-16i interface card PCI Express x8 SFF-8654

The Broadcom MegaRAID 9562-16i interface card PCI Express x8 SFF-8654 is an internal RAID controller designed for high-performance server storage. It supports SAS and SATA drives and can operate in environments that include NVMe, offering a tri-mode OCP 3.0 SFF implementation for flexible integration. The card uses a PCI Express x8 host interface and an SFF-8654 external connector format, and supports RAID levels 0, 1, 5, 6, 10, 50 and 60. With a maximum transfer rate of 12 Gbit/s per link, passive cooling and an MTBF of approximately 3,000,000 hours, the controller is sized for compact server deployments with dimensions of 76 mm width and 115 mm depth.

Advantages

The controller consolidates NVMe, SAS and SATA device connectivity into a single OCP 3.0 tri-mode adapter, allowing storage devices to be attached in one drive bay while freeing traditional PCIe slots. Hardware RAID support across multiple levels delivers data protection and performance tuning options for different workloads. Passive cooling and a compact PCB profile make the card suitable for dense server environments where airflow and space are constrained.

Suitable for

• Enterprise servers requiring mixed NVMe/SAS/SATA storage integration via OCP 3.0
• RAID-protected storage arrays using RAID 0, 1, 5, 6, 10, 50 or 60
• High-density or short-depth chassis where a 76 x 115 mm card is preferable
• Systems that need a PCIe x8 host interface with up to 12 Gbit/s link rate per port

When it may not be suitable

This adapter is intended for internal server use and requires an available OCP 3.0 slot or compatible mounting; it is not a consumer plug-and-play peripheral for desktop PCs without proper OCP support. Systems that demand active cooling for extreme sustained workloads or require features not listed (for example integrated cache battery backup modules) may need a different RAID controller model.

Key specifications

• Interface to host: PCI Express x8
• Drive interface: SFF-8654 tri-mode (NVMe/SAS/SATA)
• Supported RAID levels: 0, 1, 5, 6, 10, 50, 60
• Maximum per-link transfer rate: 12 Gbit/s
• Cooling: passive
• Mean time between failures (MTBF): ~3,000,000 hours
• Dimensions: 76 mm (width) x 115 mm (depth)

How to use

Install the MegaRAID 9562-16i into a compatible OCP 3.0 slot or a server backplane that supports the SFF tri-mode adapter form factor. Connect the server chassis to target drive bays or an OCP-enabled drive carrier using SFF-8654 cabling or connectors as required by the platform. Configure RAID arrays through the server BIOS/UEFI utility or Broadcom management tools and initialize disks before placing them into production. Observe airflow directions and chassis cooling guidelines due to the passive cooling design.

What to consider before purchase

• Verify that the server motherboard or backplane supports OCP 3.0 tri-mode adapters and SFF-8654 connections
• Confirm compatibility of intended NVMe, SAS or SATA drives with the controller and the server platform
• Ensure available PCIe lane allocation and BIOS support for a PCIe x8 device
• Consider whether passive cooling is sufficient for your workload and chassis airflow

Usage recommendations

For reliable operation, use vendor-supported firmware and management utilities to configure RAID sets and monitor drive health; place the card in a server slot with adequate airflow and validate drive compatibility before deploying into production.