Pool cleaning robot Bublue C10 — robotic cleaner for residential pools, model C10

The Bublue C10 pool cleaning robot is a robotic cleaner for residential pools designed to automate routine floor, wall and waterline cleaning. Equipped with a three-motor drive and Bluehole Tech™ for stable suction and intensive scrubbing, the C10 performs comprehensive cleaning cycles for pools up to approximately 80 m². Intelligent Bluesonic Path™ navigation with AI algorithms plans optimized S- and N-shaped routes to maximize coverage while minimizing redundant motion. The unit includes an improved filtration system with a 180 μm filter and a 4‑liter basket, supports app control over Wi‑Fi and Bluetooth, and is built from UV‑resistant materials for long outdoor use.

Advantages

Bublue C10 delivers high suction performance and twice-as-intense scrubbing thanks to a three-motor drive and Bluehole Technology™, enabling efficient removal of fine sediment and adhered deposits. AI-based route planning increases cleaning coverage and reduces missed areas, while a 5200 mAh battery provides up to 120 minutes of operation per charge and supports pools up to about 80 m². The improved filtration captures sand-sized particles and larger debris in a 4‑liter basket for fewer emptying cycles. User convenience is supported by smartphone app control, OTA updates, automatic parking at the pool wall after a cycle or on low battery, and simple maintenance through a removable, washable filter basket.

Suitable for

• Routine cleaning of residential concrete, vinyl, fiberglass or tiled pools
• Pools up to approximately 80 m² in area and up to 3 m depth
• Removal of fine sediments, leaves and typical household pool debris
• Owners who want scheduled or on-demand autonomous cleaning with app control

Key specifications

• Maximum operating time: up to 120 minutes
• Battery capacity: 5200 mAh; charging time ~3.4 hours
• Maximum coverage area: approximately 80 m²
• Maximum cleaning depth: up to 3 m
• Filter mesh density: 180 μm with 4‑liter debris basket
• Flow rate: 13 m³/h (suction performance 3434 GPH equivalent)
• Ingress protection: designed to IPX8 standards for submerged use
• Weight: 10 kg
• Materials: UV‑resistant housing suitable for outdoor pools

How to use

Place the Bublue C10 into the pool and switch it on via the unit or the mobile app. Use the app to select the desired cleaning mode (Auto, Floor, Wall), set the cycle duration and adjust passage width if needed. Start the cleaning cycle; the robot will map the pool and follow optimized S‑ or N‑shaped patterns. After completion or when battery is low, the robot will park at the pool wall for easy retrieval. Remove the unit from the water using the supplied hook, open the top cover, take out the filter basket and rinse it with clean water to remove accumulated debris. Allow the robot to dry before storage in a shaded place within the recommended temperature range.

Usage recommendations

For best results, run cleaning cycles regularly according to pool usage and seasonal conditions, empty and rinse the filter basket after heavy debris loads, keep firmware updated via the app, and store the robot in a cool, dry place away from direct sunlight when not in use.