Heat-Shrink Tube CellPack CR thin-wall 12.7/6.4 mm (MPN 8-7111)

CellPack thin-wall heat-shrink tube CR 12.7/6.4 mm is a polymer sleeve engineered to reduce from 12.7 mm outer diameter to 6.4 mm when heated. Designed for electrical insulation and mechanical protection, this heat-shrink tubing provides a compact covering for wire joints, cable repairs and component insulation where a reliable, narrow-profile sleeve is required. The material resists abrasion and helps reduce moisture ingress around splices and terminations while enabling a neat finish on wiring runs.

Advantages

The thin-wall construction allows the sleeve to conform closely to wires and connectors after shrinking, producing a low-profile, flexible insulation layer. Its shrink ratio delivers significant diameter reduction for use on mismatched or repaired cable sections. The tubing is easy to install with a common heat source and gives consistent, uniform shrinkage for predictable results across multiple applications.

Suitable for

• Insulating soldered or crimped wire joints in electrical installations
• Repairing damaged cable sheaths and restoring mechanical protection
• Automotive wiring harness repairs and protection of terminals
• Covering and protecting electronic components and connections

When it may not be suitable

This thin-wall heat-shrink tube is not intended for use where heavy mechanical protection or thick cushioning is required; in such cases, a thicker-walled or adhesive-lined variant would be more appropriate. It is also not intended as a primary sealing solution for long-term immersion or high-pressure fluid exposure without additional sealing measures.

Key specifications

• Initial outer diameter: 12.7 mm
• Final outer diameter after shrinking: 6.4 mm
• Material type: thin-wall polymer heat-shrink tubing
• Function: electrical insulation, abrasion resistance, moisture protection
• Typical applications: wire joints, cable repairs, component covering

How to use

Slide the tube over the prepared wire joint or component before making the final connection when possible. Apply heat evenly using a heat gun, hot air tool or controlled flame while maintaining a safe distance to avoid burning; heat until the tube uniformly contracts and conforms to the underlying shape. Allow the tubing to cool and inspect the shrink for complete coverage and a tight seal. Trim excess length if necessary after cooling.

What to consider before purchase

• Required final diameter to ensure a secure fit after shrinking
• Whether thin-wall construction meets the mechanical protection needs of the application
• Compatibility with the operating temperatures and environment (moisture, chemicals) of the installation
• Available heating method for controlled and even shrinkage

Usage recommendations

For best results, use a regulated hot air gun and move evenly along the tubing to achieve uniform shrinkage. When insulating splices in environments with potential moisture exposure, pair the thin-wall tube with appropriate sealing or choose an adhesive-lined variant if long-term watertight protection is required.