Tubular ring lug connector Cimco 180747, angled, tin-plated, hole Ø 2.05 cm

Cimco 180747 is an angled tubular ring lug designed to provide a compact and reliable right-angle termination for electrical conductors. The connector features tin plating to improve corrosion resistance and a ring hole with a diameter of 2.05 cm, allowing secure fastening to studs or terminal posts. Its tubular body accepts stripped cable ends for mechanical crimping or soldering, delivering stable electrical contact in panels, machinery, and vehicle installations where space or routing requires a 90° connection.

Advantages

The angled tubular ring lug offers improved cable routing and strain relief by redirecting the conductor at a right angle, reducing stress on the connection point. Tin plating enhances surface protection against oxidation and ensures consistent conductivity over time. Its tubular design allows for efficient crimping or soldered joints, producing dependable mechanical retention and low electrical resistance for sustained performance.

Suitable for

• Terminating stranded or solid conductors onto studs and terminal posts
• Electrical panels and distribution boards with limited clearance
• Automotive and vehicle electrical systems requiring right-angle connections
• Industrial machinery and equipment where space-saving terminations are needed

Key specifications

• Connection type: angled tubular ring lug (90°)
• Material surface: tin plated for corrosion resistance
• Ring hole diameter: 2.05 cm
• Body form: tubular for insertion of stripped conductor and crimp/solder termination
• Typical uses: stud or terminal post fastening, right-angle cable routing

How to use

Prepare the conductor by stripping the insulation to the appropriate length for the tubular body. Insert the stripped conductor fully into the tube, then secure the connection using a suitable crimping tool sized for the conductor cross-section or by soldering for a permanent joint. Place the ring over the stud or terminal post and fasten with the appropriate nut and washer to achieve firm mechanical contact and reliable electrical continuity. Ensure the connection is tightened to the torque recommended for the terminal hardware and that any exposed conductive parts are insulated as required by the application.

Usage recommendations

Use a crimp die that matches the conductor cross-section and inspect crimp quality visually and mechanically. Select corrosion-resistant hardware and apply protective measures such as insulating sleeves or sealants in harsh environments. Verify that the ring hole diameter matches the stud or terminal post and avoid exceeding the rated current for the conductor and terminal combination.