Elbow 90° Pressed Female Thread MultiSkin brass/tinned 20x1/2 Comap

Pressed 90° elbow with female thread from Comap's MultiSkin series, manufactured from brass with tin plating. This fitting provides a compact right-angle transition between a 20 mm press pipe and a 1/2" threaded component, combining a press connection on one side and a female thread on the other. It is intended for plumbing and heating installations where a reliable, corrosion-resistant brass/tinned connector is required and a secure, leak-tight press joint is preferred over soldering or threaded adapters.

Advantages

The MultiSkin pressed elbow offers a robust brass construction with tin plating for enhanced corrosion resistance and improved solderability where applicable. The pressed connection delivers consistent, mechanical sealing suitable for potable water and heating systems, while the internal female thread enables direct attachment of threaded valves, fittings or fixtures. The compact 90° design reduces installation space and simplifies directional changes in pipe runs without additional adapters.

Suitable for

• Plumbing installations for potable water distribution
• Domestic and commercial heating systems
• Connections to threaded valves, radiators or fittings
• Situations requiring compact right-angle transitions in tight spaces

Key specifications

• Material: brass with tin plating for improved corrosion resistance
• Connection types: press connection (20 mm) to female threaded connection (1/2")
• Orientation: 90° elbow for right-angle change of direction
• Series: MultiSkin, designed for plumbing and heating use
• Typical applications: potable water and heating circuits

How to use

Prepare the press pipe by cutting squarely and deburring the end, then insert the pipe fully into the press end of the fitting until it seats. Use a compatible press tool and jaw sized for 20 mm MultiSkin fittings to make a single, complete press operation according to the press tool manufacturer's instructions. On the threaded end, apply appropriate thread sealing (such as PTFE tape or approved thread sealant) if required by the installation practice, and tighten the mating threaded component to the recommended torque for the fixture being connected.

Usage recommendations

Verify compatibility of the press tool and jaws with MultiSkin fittings and follow applicable standards and local regulations. Inspect press joints visually and with any specified testing methods (pressure test) before putting the system into service. Where installations are exposed to aggressive environments, periodic inspection is recommended to confirm continued performance.