Fitting elbow Comap press-fit double-sided 50x4 for pipe connections

Comap press-fit double-sided elbow 50x4 is a metal press fitting engineered for creating a 90° connection between two straight-run pipes with an outer diameter of 50 mm and a wall thickness of 4 mm. Designed for use in potable water, heating and circulation systems that employ press fitting technology, this elbow forms a permanent joint when installed with compatible press tools and press rings. The fitting is intended for durable, leak-tight pipe connections in residential and commercial plumbing and HVAC installations.

Advantages

The double-sided press-fit design ensures uniform force distribution on both pipe ends during pressing, which improves joint reliability and reduces the risk of deformation. Made from metal suitable for press technology, the elbow provides mechanical strength and long-term dimensional stability under normal operating temperatures and pressures. Installation is fast and does not require soldering or welding, which reduces installation time and heat exposure. When installed correctly with matching press jaws and seals, the fitting offers a watertight joint compatible with potable water and heating circuits.

Suitable for

• Potable water distribution systems
• Central heating and hot-water circulation
• Plumbing installations requiring 90° directional changes
• Commercial and residential buildings using press-fit pipework

Key specifications

• Connection type: double-sided press-fit
• Shape: 90° elbow
• Nominal outer diameter: 50 mm
• Wall thickness: 4 mm
• Material: metal press fitting (compatible with press-fit systems)
• Intended media: potable water, heating fluids

How to use

Before installation, ensure the pipes are clean, free of burrs and cut squarely to the correct length. Slide the appropriate press ring onto each pipe end if required by the press system, insert the pipe fully into each side of the elbow until it reaches the stop, and verify alignment at 90°. Select press jaws and a press tool compatible with the fitting and pipe material, then perform the pressing operation according to the tool manufacturer's instructions. After pressing, visually inspect each joint and, where applicable, perform a pressure test to confirm leak-tightness.

Usage recommendations

Use this Comap press-fit elbow only with compatible press fittings, rings and tools certified for the same system. Follow local plumbing codes and the press tool manufacturer's guidance for pressure testing, operational temperature limits and installation procedures to ensure safe and compliant connections.