Tee fitting Comap MultiSkin press-fit female thread brass/galvanized 32 x 1/2" x 32 (model 7130GW321232)

The Comap MultiSkin press-fit tee fitting with a 1/2" female thread is a brass body with galvanized components designed to join three pipe runs in a T-branch configuration. It accepts 32 mm press-fit pipes on the run connections and provides a threaded internal connection on the branch for attaching valves, meters, or other threaded accessories. The fitting is intended for use in potable water and heating systems when installed with compatible MultiSkin press tools and appropriate seals.

Advantages

This tee fitting combines press-fit technology for fast, reliable connections on the main runs with a female threaded branch for flexibility mounting threaded components. The brass construction offers good corrosion resistance and mechanical strength while the galvanized parts improve surface durability. The press-fit ends reduce installation time and create a consistent, leak-resistant joint when installed with the correct pressing equipment and seals.

Suitable for

• Plumbing systems for potable cold and hot water distribution
• Heating circuit installations and radiator connections
• Situations where a threaded outlet is needed for valves, gauges, or meters
• Retrofit or new-build projects using 32 mm press-fit MultiSkin piping

When it may not be suitable

This fitting is not appropriate for systems that require only all-threaded or all-soldered connections, or for pipe materials and pressing systems incompatible with the MultiSkin press standard. It should not be used where the operating temperatures or pressures exceed the limits of the piping, seals, or the press-fit system specified by the pipe and tool manufacturers.

Key specifications

• Connection type: press-fit on two runs and internal female thread on branch
• Run pipe diameter: 32 mm (press-fit ends)
• Branch thread size: 1/2" internal (female)
• Body material: brass with galvanized parts
• Application: potable water and heating installations when used with compatible seals and tools

How to use

Cut and prepare the 32 mm pipes to the required length, ensuring ends are square and free of burrs. Slide the correct sealing element or ring if required by the MultiSkin system, insert pipes fully into the press-fit ends of the tee, and perform the press operation with the manufacturer-recommended press tool and jaws for 32 mm fittings. For the threaded branch, apply suitable thread sealant or tape compatible with potable water if required, then attach the threaded component and tighten to the torque recommended for the accessory. Verify all joints after pressure testing according to project requirements.

What to consider before purchase

• Confirm compatibility of the fitting with your MultiSkin press tools and 32 mm press-fit piping system
• Check the required branch thread type and size for intended accessories
• Verify that materials (brass and galvanized parts) meet the project corrosion and potable water requirements
• Ensure available pressing jaws and seals rated for the fitting size and system

Usage recommendations

Use the tee only with the manufacturer-approved seals and press tools for MultiSkin fittings. Perform a pressure test after installation and follow local codes for potable water and heating systems. Replace any damaged fittings or seals before commissioning.