Wall elbow Comap MultiSkin press-fit brass/tinned 16x1/2 L=40 mm

Comap MultiSkin press-fit wall elbow in brass with a tinned surface provides a compact, right-angle outlet for water supply and heating systems. Designed for 16 x 1/2 connections and a projection length of 40 mm, this fitting creates a secure transition between concealed pipework and exposed fixtures where a wall-mounted connection is required. The press-fit design ensures a fast, solder-free installation compatible with MultiSkin press systems.

Advantages

The brass construction with tinned surface offers corrosion resistance and durable mechanical strength while maintaining compatibility with potable water systems. The press-fit connection reduces installation time and eliminates the need for open flame or soldering, lowering on-site risks. Its compact 40 mm projection creates a neat finish at the wall, simplifying alignment with valves, hoses or other outlets.

Suitable for

• Domestic and commercial water supply lines
• Heating system connections and radiator feed lines
• Wall-mounted taps, showers and appliance outlets
• Retrofit or new-build plumbing where press-fit fittings are specified

Key specifications

• Material: brass with tinned surface
• Connection type: press-fit on pipe side, female 1/2" thread on outlet
• Pipe compatibility: 16 mm nominal pipe
• Projection length (L): 40 mm
• Angle: 90° wall elbow

How to use

Prepare the pipe ends by cutting square and deburring to ensure a clean press-fit joint. Slide the appropriate press sleeve or ring over the pipe where required by the press system and insert the elbow fully until the stop. Position the press tool over the fitting and complete the press operation following the press-tool manufacturer's instructions. Thread the outlet side to the fixture or valve using appropriate sealing methods for the threaded connection. Verify the joint visually and pressure-test the system according to applicable standards.

Usage recommendations

Use compatible press tools and sleeves certified for MultiSkin press systems. Confirm material compatibility with system media and apply thread sealant or tape on the threaded outlet as required. Perform pressure testing after installation and follow local plumbing codes.