Copper 90° Elbow Conex 5001A for Soldered Joints, 35 mm

Copper 90° elbow Conex 5001A for Soldered Joints, 35 mm is a right-angle copper fitting designed for soldered (brazed) connections in plumbing, heating and refrigeration systems. It connects two copper tubes with a 35 mm outside diameter, providing a reliable directional change while maintaining flow characteristics appropriate for potable water, heating circuits and compatible refrigeration applications where soldered joints are specified.

Advantages

This copper elbow is manufactured to provide consistent wall thickness and dimensional accuracy for secure soldered joints. Copper material offers corrosion resistance and thermal conductivity suitable for hot and cold water systems as well as heating circuits. The smooth internal surface minimizes flow resistance and sediment accumulation, and the fitting is compatible with standard soldering techniques used in professional plumbing and HVAC installations.

Suitable for

• Potable water supply lines using copper tubing with 35 mm outside diameter
• Domestic and commercial heating circuits requiring a 90° change of direction
• Refrigeration and chilled water lines where soldered copper joints are required
• Retrofit and new-build plumbing installations using brazing/soldering methods

Key specifications

• Material: copper
• Angle: 90° elbow
• Connection type: for soldered (brazed) joints
• Compatible tube outside diameter: 35 mm
• Typical applications: potable water, heating circuits, refrigeration lines

How to use

Prepare tube ends by cutting square, de-burring and cleaning to remove oxides and contaminants. Flux the fitting and tube ends as recommended for the soldering alloy in use. Assemble the joint and apply heat evenly with a suitable torch until the solder flows and fills the joint. Allow the assembly to cool naturally and clean any residual flux. Verify the joint for leaks and proper alignment before restoring system pressure.

Usage recommendations

Use appropriate personal protective equipment, suitable flux and solder alloy for the application, and follow local codes and standards for potable water, heating and refrigeration systems. Ensure compatibility of the fitting with system pressures and temperatures and perform pressure testing after installation according to industry practice.