Push-button panel Conrad Drucktaster 24 V DC 50 mA 1× On/Off IP65 stainless steel

The Conrad Drucktaster push-button panel is a stainless-steel control element intended for low-current 24 V DC circuits. It provides a single momentary on/off contact rated for 24 V DC and up to 50 mA. The device features an IP65 enclosure rating, offering protection against dust ingress and water jets, which makes it suitable for installation in industrial control panels, machine operator interfaces, and damp or outdoor locations where a durable metallic actuator and basic sealing are required.

Advantages

The stainless-steel construction ensures mechanical robustness and corrosion resistance for repeated operation in industrial or semi-exposed environments. With a compact design and a single momentary contact, the control element supports straightforward integration into existing control circuits. The IP65 protection class helps maintain reliable switching performance in environments with dust or occasional water exposure. Low power consumption is appropriate for signal-level inputs and for applications that require minimal current draw.

Suitable for

• Industrial control panels and operator consoles
• Machine start/stop interfaces and emergency control stations with low-current signaling
• Outdoor enclosures or damp areas where IP65 protection is required
• Prototyping and low-voltage control circuits at 24 V DC

When it may not be suitable

This push-button panel is intended for low-current switching only; it is not suitable for controlling high-current loads or mains voltage devices directly. Where higher switching currents, contact ratings, or isolation are required (for example driving motors, heaters or mains-powered equipment), a suitable relay, contactor or driver must be used in combination. The single momentary contact design is not appropriate for applications that require latching or multi-function control without additional circuitry.

Key specifications

• Nominal voltage: 24 V DC
• Maximum switching current: 50 mA
• Contact configuration: single momentary on/off contact
• Enclosure protection: IP65 (dust tight and protected against water jets)
• Material: stainless steel actuator and panel

How to use

Mount the push-button panel into a suitably sized cutout in the control panel and secure it according to the mechanical mounting instructions for the enclosure. Connect the device to the 24 V DC control circuit using appropriate wiring and terminals, observing polarity and ensuring secure, low-resistance connections. Use the button for momentary signal inputs; if the application requires switching higher currents or mains supply, use this push-button to drive an intermediate relay or controller that matches the required load. Verify IP65 sealing after installation by checking the panel gasket and mounting tightness.

What to consider before purchase

• Confirm the contact rating (24 V DC, 50 mA) matches the input requirements of the device you intend to control.
• Assess whether a momentary single contact meets your functional needs or if a latching switch or multi-contact assembly is required.
• Ensure the panel cutout dimensions and mounting method are compatible with your enclosure.
• Consider environmental exposure to confirm IP65 protection is sufficient for your installation.

Usage recommendations

For reliable operation, use the Conrad Drucktaster as a signal-level input device in 24 V DC control systems and pair it with appropriately rated relays or controllers when switching higher currents or mains voltage. Regularly inspect the stainless-steel actuator and sealing surfaces for wear or debris in harsh environments to maintain IP65 integrity.