3D printer filament Creality PLA Hyper Grey 1 kg with RFID

Creality PLA Hyper Grey 1 kg with RFID is a general-purpose PLA 3D printer filament designed for FDM/FFF machines. The filament combines a high-fluidity formulation and rapid cooling to support high-speed printing while maintaining dimensional precision. An integrated RFID tag enables automatic spool identification and tracking on compatible Creality printers and CFS devices, simplifying filament management for hobbyists and prototyping workflows.

Advantages

The Hyper Series PLA offers high fluidity for consistent melting and extrusion, enabling print speeds up to 600 mm/s without sacrificing extrusion stability. Rapid cooling improves layer shaping and reduces stringing and deformation at high speeds. Compared with traditional PLA, this filament provides higher tensile strength and improved toughness, yielding stronger printed parts with better load-bearing capacity. RFID integration facilitates easy filament recognition and usage tracking on supported machines.

Suitable for

• Rapid prototyping and functional prototypes
• Figurines and detailed decorative models
• Mechanical parts with moderate structural requirements
• Small-batch or higher-speed production runs on desktop FDM/FFF printers

Key specifications

• Filament material: PLA (polylactic acid)
• Spool weight: 1 kg net
• Diameter: 1.75 ± 0.03 mm
• Density: 1.25 g/cm³
• Recommended printing temperature: 190–230 °C
• Printable speed range: 30–600 mm/s (depends on printer capabilities and settings)
• Tensile strength (X–Y): ~53 MPa
• Tensile modulus (X–Y): ~1146 MPa
• Elongation at break: ~6.3%
• Bending strength (X–Y): ~92.3 MPa

How to use

Load the 1.75 mm filament onto a compatible FDM/FFF printer and confirm the RFID detection if your machine supports automatic spool recognition. Set the hotend temperature between 190 °C and 230 °C according to your printer and nozzle size, and configure print speeds based on model geometry and cooling capacity; while the filament supports speeds up to 600 mm/s, typical detailed prints benefit from lower speeds for best surface quality. Ensure proper first-layer adhesion by calibrating bed level and using a suitable build surface or adhesive method.

Usage recommendations

For best results, start with a mid-range temperature (200–210 °C) and moderate speeds, then adjust temperature and fan settings to balance surface finish and interlayer bonding. Use active cooling for fine details, monitor for oozing at very high speeds, and store the spool in a dry environment to preserve filament properties.