3D printer filament Creality PLA Hyper skin RFID 1 kg — PLA material, 1kg spool, RFID-tagged

Creality PLA Hyper skin RFID is a 1 kg spool of PLA 3D printer filament with an integrated RFID tag for spool identification. Manufactured from polylactic acid (PLA) with a high-fluidity, fast-cooling formula, this filament is designed for general-purpose FDM printing, prototyping, model making and applications that require higher toughness and dimensional stability at increased printing speeds. The embedded RFID enables compatible Creality printers and filament management systems to read spool data for easier setup and tracking.

Advantages

High fluidity and rapid cooling allow Hyper Series PLA to support print speeds up to 600 mm/s while maintaining consistent extrusion. The material demonstrates high dimensional stability with limited thermal expansion and cold contraction, delivering precise parts even when printed quickly. Compared with ordinary PLA, this Hyper Series offers increased tensile strength and improved toughness, providing better structural bearing capacity for functional parts and prototypes. The RFID-tagged spool simplifies filament identification and workflow when used with compatible hardware and systems.

Suitable for

• Rapid prototyping and engineering models
• Figurines, decorative models and miniatures
• Functional machine parts and brackets requiring improved toughness
• High-speed printing workflows and small-scale production runs

Key specifications

• Material: Polylactic acid (PLA)
• Spool weight: 1 kg
• Filament diameter: 1.75 ± 0.03 mm
• Density: 1.25 g/cm³
• Tensile strength (X–Y): 52.991 MPa
• Tensile modulus (X–Y): 1146.064 MPa
• Elongation at break: 6.3%
• Bending strength (X–Y): 92.3 MPa
• Recommended printing temperature: 190–230 °C
• Recommended printing speed range: 30–600 mm/s
• RFID: integrated tag for spool identification (compatible with systems that support RFID-enabled filament)

How to use

Load the 1.75 mm filament onto a compatible FDM printer following the printer manufacturer's filament loading procedure. If the printer or filament management system supports RFID, allow it to read the spool data after installation to apply any stored settings. Set nozzle temperature within the recommended 190–230 °C range and adjust print speed according to the part geometry and desired surface quality; start with moderate speeds and increase toward higher values only after confirming stable extrusion and adequate cooling. Ensure proper bed adhesion using a suitable build surface or adhesive and calibrate extrusion multiplier/flow to match your machine.

Usage recommendations

For best results with Creality PLA Hyper skin RFID, begin prints at a conservative speed and temperature, then gradually optimize for higher-speed printing while monitoring layer bonding and dimensional accuracy. Use sufficient part cooling for fine details at elevated speeds and verify bed adhesion before long or tall prints. Employ compatible Creality printers or filament systems to take advantage of the RFID tag for spool tracking and automatic parameter application.