3D printer filament Creality PLA Hyper white 1 kg with RFID

Creality PLA Hyper white 1 kg with RFID is a PLA filament spool formulated for FDM/FFF 3D printers. The material combines high fluidity and rapid cooling to support wide print-speed ranges up to 600 mm/s while maintaining dimensional stability and a good surface finish. The integrated RFID tag enables automatic material recognition on compatible Creality printers and dispensing systems, simplifying spool management and print-profile selection. Typical applications include prototyping, figurines, machine parts and small-scale production runs.

Advantages

High fluidity and a fast cooling formula allow consistent melting and extrusion at elevated speeds, reducing common defects when printing quickly. The filament demonstrates small thermal expansion and limited cold contraction, which helps preserve dimensional accuracy and repeatability. Mechanical properties show improved tensile strength and toughness compared with traditional PLA, delivering stronger parts with better load-bearing capacity. The embedded RFID provides reliable, automatic identification for supported hardware.

Suitable for

• Rapid prototyping and concept models
• Detailed figurines and display models
• Functional machine parts and fixtures
• Short-run or small-batch production

Key specifications

• Filament type: PLA
• Color: White
• Spool weight: 1 kg
• Diameter: 1.75 ± 0.03 mm
• Density: 1.25 g/cm³
• Tensile strength (X–Y): 52.991 MPa
• Tensile modulus (X–Y): 1146.064 MPa
• Elongation at break: 6.3%
• Bending strength (X–Y): 92.3 MPa
• Recommended printing temperature: 190–230 °C
• Supported printing speed: 30–600 mm/s
• Integrated RFID for spool identification

How to use

Load the Creality PLA Hyper white filament into a compatible 1.75 mm extruder according to your printer manufacturer’s instructions. Set the nozzle temperature within the recommended 190–230 °C range and select an initial print speed appropriate for the model complexity; lower speeds improve fine detail while higher speeds leverage the filament’s high fluidity. Ensure proper bed adhesion using a suitable build surface or adhesive method for PLA and allow parts to cool gradually for improved dimensional accuracy.

Usage recommendations

For best results, start prints at moderate speeds and fine-tune extrusion multiplier and retraction settings to match your printer. Use cooling fans to enhance surface quality and layer definition when printing at higher speeds. Store the spool in a dry environment or sealed container with desiccant to preserve printability and mechanical performance.