Wireless RF Anti-Noise Shield by cyberteam for MikroTik OmniTIK (Model ANS-OMNT)

The Wireless RF Anti-Noise Shield by cyberteam for MikroTik OmniTIK (Model ANS-OMNT) is an accessory designed to reduce external radio-frequency interference affecting OmniTIK devices. The shield encloses the radio area to limit the impact of adjacent transmitters and ambient RF noise, helping to stabilise the wireless link and improve throughput consistency in crowded frequency environments. It is intended for use where external interference degrades performance, including outdoor installations and mixed-use sites with multiple emitters.

Advantages

The anti-noise shield provides passive RF attenuation without altering the device's firmware or radio settings, offering a hardware-level approach to interference mitigation. Its form factor is matched to fit the MikroTik OmniTIK housing and maintain access to mounting points and connectors. By reducing unwanted external signals, the shield can contribute to fewer retransmissions and more stable link parameters under noisy conditions.

Suitable for

• Outdoor and rooftop OmniTIK installations in urban or industrial areas
• Locations with nearby radio emitters, base stations or co-located wireless equipment
• Deployments that require increased stability for point-to-multipoint links
• Environments where passive hardware measures are preferred over frequency changes

Key specifications

• Purpose: Passive RF shielding for OmniTIK wireless radio section
• Material: Conductive shielding material designed to attenuate external RF energy
• Compatibility: Designed to mechanically fit MikroTik OmniTIK form factor and mounting points
• Installation: External accessory that mounts to the device without firmware changes
• Environmental use: Suitable for outdoor and indoor installations when mounted correctly

How to use

Install the anti-noise shield over the radio section of the MikroTik OmniTIK according to the mechanical alignment and mounting instructions provided by the manufacturer. Ensure that connectors, antennas and necessary ports remain accessible and that the shield is firmly secured to withstand environmental conditions. After fitting, verify antenna orientation and run link tests to confirm reduced interference and expected performance changes. No device configuration changes are required for the shield to function.

Usage recommendations

Place the device and shield where line-of-sight to intended peers is preserved and avoid placing the assembly adjacent to strong local emitters; combine the shield with good cable routing and proper earthing to maximise interference reduction and maintain reliable wireless links.