Mini electric pump Cycplus AS2 PRO MAX — portable inflator for bikes, e-scooters and sports equipment

The Cycplus AS2 PRO MAX — Mini electric pump Cycplus AS2 PRO MAX — portable inflator for bikes, e-scooters and sports equipment is a compact cordless inflator designed for fast, accurate on-the-go tyre and ball inflation. With a maximum pressure of 120 PSI, a built-in LED display and a 600 mAh rechargeable battery, the device combines portability and power for commuting, cycling trips and emergency roadside use. The pump supports common valve types and comes with a hose, Presta adapter and accessories to suit a wide range of inflating tasks.

Advantages

High maximum pressure (120 PSI) and rapid pumping speed allow quick restoration of tyre pressure for road, gravel and MTB tyres as well as small vehicle tires and sports equipment. The integrated pressure gauge with ±1 PSI accuracy and automatic shut-off prevents over-inflation and simplifies precise pressure setting. A USB-C rechargeable 600 mAh battery provides multiple inflations per charge and fast recharging in approximately one hour. The aluminium-alloy body, silicone sleeve and waterproof pouch increase durability and usability in varied conditions.

Suitable for

• Inflating bicycle tyres (road, gravel, MTB)
• Inflating e-scooter tyres and small vehicle tyres
• Inflating balls and small sports equipment
• Emergency roadside inflation and commuting

Key specifications

• Maximum pressure: 120 PSI
• Accuracy: ±1 PSI
• Battery capacity: 600 mAh (USB-C charging)
• Charging time: approx. 1 hour
• Pumping speed: 0 to 120 PSI in ~75 seconds (700×25C tyre reference)
• Material: aluminium alloy body with silicone sleeve
• Weight and size: 205 g; 54 × 32 × 81 mm
• Display: built-in LED screen (shows pressure, unit and battery level)
• Accessories included: hose, Presta adapter, ball needle, waterproof pouch

How to use

Charge the pump via the USB‑C port until fully charged (about one hour). Attach the hose and select the appropriate valve adapter if needed. Power on the device, choose the pressure unit (PSI or BAR) on the LED screen and set the target pressure. Connect the pump to the tyre or equipment valve, start inflation with the one‑touch control and let the pump run until it automatically stops at the preset pressure. After use, disconnect the hose, stow the accessories in the pouch and store the pump in its silicone sleeve to protect the surface.

Usage recommendations

For reliable results, verify valve compatibility before connecting and ensure the valve is clean and free of debris. Use the built‑in gauge to set recommended pressures for your tyre type; for frequent long trips carry the USB‑C cable and the waterproof pouch. Avoid continuous operation beyond manufacturer guidance to prevent overheating; allow short cooling intervals during multiple successive inflations.