Leave your address - as soon as the price of the product goes down, you'll know about it right away
Cold/hot laminator Dahle 70104 250 mm/min 23 cm width
Cold/hot laminator Dahle 70104 250 mm/min 23 cm width
In cart {{totalProductsCount}} item(s)
Your cart is empty
Cold/hot laminator Dahle 70104 250 mm/min 23 cm width
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Cold/hot laminator Dahle 70104 250 mm/min 23 cm width
Cold/hot laminator Dahle 70104 250 mm/min 23 cm width
The Dahle 70104 cold/hot laminator accepts documents up to 23 cm wide and laminates at a speed of 250 mm/min. It combines two heated silicone rollers for hot lamination with a cold mode for temperature-sensitive materials, and has a pre-heat time of approximately 3–5 minutes. The unit is compact, consumes 265 W and is intended for protecting and extending the life of important documents.
Two-level temperature setting allows choosing between cold and hot lamination for different materials. The permanent seal option provides reliable protection for frequently handled documents. Two heated silicone rollers ensure even heat distribution and consistent lamination results. The compact design and 23 cm maximum width make the laminator suitable for small offices and personal use.
Place the laminator on a stable, level surface and plug it into a suitable outlet. Select cold or hot mode using the two-level temperature control, then wait for the pre-heat period (about 3–5 minutes) if using hot lamination. Insert the item inside an appropriately sized pouch, align it, and feed the sealed end into the rollers. Allow the laminated item to exit fully and cool on a flat surface before handling.
Use hot mode for standard lamination pouches and items that tolerate heat; use cold mode for heat-sensitive materials. Allow the unit to reach operating temperature before lamination for best results, and use pouches that match the device's maximum width (up to 230 mm).
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}