Filament PETG 1.75 mm 5 kg by devil design — White

Devil design PETG filament 1.75 mm in white, on a 5 kg spool, is a filament aimed at functional 3D prints that require improved mechanical strength and chemical resistance compared to standard PLA. Manufactured for compatibility with most FDM/FFF printers that accept 1.75 mm filament, this PETG offers good layer adhesion, low warping and dimensional stability for parts such as housings, brackets and prototypes where durability and reliability matter.

Advantages

This PETG filament delivers a balance of toughness and printability: it prints at moderate temperatures with reduced brittleness compared with PLA, provides enhanced impact resistance and shows good resistance to moisture and many chemicals. Its white colour gives a neutral finish suitable for painting or post-processing, and the 5 kg spool reduces the need for frequent filament changes when printing larger parts or multiple items.

Suitable for

• Functional prototypes and mechanical components
• Enclosures, housings and structural parts
• Visual models and fixtures requiring a clean white surface
• Applications needing improved impact and chemical resistance

Key specifications

• Filament diameter: 1.75 mm
• Material: PETG (glycol-modified PET)
• Spool weight: 5 kg
• Colour: White
• Compatibility: standard FDM/FFF 3D printers accepting 1.75 mm filament
• Typical properties: good layer adhesion, low warping, enhanced impact resistance

How to use

Load the filament onto a compatible 3D printer designed for 1.75 mm filament and set appropriate print parameters for PETG: nozzle temperatures typically in the mid-range suitable for PETG, heated bed to reduce warping, and moderate print speeds to ensure good layer bonding. Use a clean, dry filament path and, if needed, a filament dryer before printing in humid environments. Adjust retraction and cooling settings to minimise stringing while maintaining adhesion between layers.

Usage recommendations

For best results, print PETG with a heated bed (typically 60–80°C) and a nozzle temperature matched to your printer and the filament batch. Use adhesion aids such as a PEI sheet or glue stick if required, and consider using a brim for tall or small-footprint parts. Store the spool in a dry place or sealed container with desiccant to preserve filament quality.