DMX Angle KB3 DMX 180x120x40x5mm narrow beam mounting bracket

Angle KB3 DMX 180x120x40x5mm narrow beam mounting bracket is a DMX-brand bracket for narrow-beam fixtures. It is made from 5 mm thick galvanized S235 steel and features staggered hole placement to avoid driving fasteners into the same wood fibers, reducing the risk of splitting. The bracket is intended to support and accurately position lighting or optical components with a focused beam profile in studio, stage, or architectural installations.

Advantages

The bracket’s staggered holes distribute fastener loads and lower splitting risk in wooden substrates. Constructed from galvanized S235 steel, it offers consistent mechanical strength and corrosion resistance. Its 5 mm thickness and tested load capacity provide stable support for narrow-beam fixtures while maintaining a compact footprint suitable for tight mounting locations.

Suitable for

• Mounting narrow-beam lighting fixtures
• Studio and stage installations requiring precise aiming
• Architectural lighting where compact, robust brackets are needed
• Wooden structures using ø4 mm nails or ø4–6 mm screws

Key specifications

• Brand: DMX
• Model / MPN: 8140173
• EAN: 5907708140173
• Material: Galvanized S235 steel
• Thickness: 5 mm
• Dimensions: 180 × 120 × 40 × 5 mm
• Recommended fasteners: carpentry nails ø4 mm; wood screws ø4 mm, ø6 mm
• Load capacity: 8.62 kN

How to use

Position the bracket on the mounting surface and mark fastener locations following the staggered hole pattern. Use appropriate ø4 mm carpentry nails or ø4–6 mm wood screws to secure the bracket, ensuring fasteners go into solid wood or suitable substrate. Tighten screws or drive nails until the bracket sits flush; avoid over-torquing to prevent deformation of the bracket or fasteners.

Usage recommendations

For reliable performance, install the bracket on sound timber or a structural substrate and use the recommended fastener diameters. Where corrosion protection is critical, ensure complementary fasteners and fixtures have compatible coatings. Verify the combined weight and dynamic loads of the fixture do not exceed the bracket’s 8.62 kN capacity.