Rocker inline cable switch 1-pole 2.5A 250V White Düwi DWI090465/ALL

Inline rocker cable switch by Düwi is a compact single-pole switch designed for simple on/off control of a single circuit or light fitting. The switch is rated for 2.5 A at 250 V and features a white housing with a rocker actuator intended for installation directly on a cable run. This inline design provides a discreet and easy-to-reach control point for lamps, small appliances, and similar low-current circuits in domestic or light commercial environments.

Advantages

The single-pole construction makes wiring straightforward when only one conductor needs to be interrupted. The white compact housing and rocker actuator offer a minimal visual profile and easy operation. Rated for 2.5 A at 250 V, the switch is suitable for low-current loads and provides a simple solution where a wall-mounted switch or more complex control is unnecessary. Its inline form factor allows installation without opening wall boxes or altering fixed wiring runs.

Suitable for

• Table and floor lamps requiring inline on/off control
• Small plug-in appliances with low current draw
• Temporary lighting or work lamps where a cable-mounted switch is convenient
• Simple single-circuit switching in household or light commercial settings

Key specifications

• Switch type: Inline single-pole rocker switch
• Rated current: 2.5 A
• Rated voltage: 250 V AC
• Actuator: Rocker
• Color: White
• Mounting: Cable inline installation

How to use

Install the switch inline on the phase conductor of the cable feeding the device to be controlled, following local electrical codes and safety practices. Ensure power is disconnected before cutting or stripping the cable and making connections. Secure the cable within the switch housing per the manufacturer's guidance so that conductors are held firmly and insulation is intact. After installation, restore power and test the rocker to confirm reliable on/off operation of the connected load.

Usage recommendations

Use this switch only with loads that do not exceed 2.5 A at 250 V. For inductive loads, motors, or circuits with higher currents or inrush, choose a switch rated for higher current or a specialized switching device. If unsure about installation or compliance with local regulations, consult a qualified electrician.