Video adapter Eaton ADDER CATx DisplayPort CAM (model CATX-DP-USBA) for CATx extension systems

The Eaton ADDER CATx DisplayPort CAM (model CATX-DP-USBA) is a compact DisplayPort computer access module designed for use with ADDER CATx extension systems. It provides a DisplayPort video connection together with USB and audio interfaces to transmit video, peripheral and audio signals over CATx cable to compatible KVM switches and extender receivers. The module supports extension distances up to 300 metres when used with AdderView CATx switches or AdderLink extender receivers, enabling remote placement of displays and centralized control of equipment in professional AV and IT installations.

Advantages

The CATX-DP-USBA combines DisplayPort video, USB and audio in a small form factor that connects directly to the computer’s DisplayPort, USB and audio ports and then uses standard CAT5/5e/6 cabling to reach remote receivers. Its compatibility with AdderView CATx KVM switches and AdderLink X2 Silver or X200 receivers enables consolidated management of multiple endpoints while maintaining signal integrity over long distances. The design focuses on straightforward installation and reliable transmission of high-resolution video and peripheral signals for control-room, broadcast and enterprise environments.

Suitable for (tasks / use cases)

• Extending a DisplayPort-equipped workstation to a remote display up to 300 metres away
• Connecting keyboard, mouse and USB peripherals to remote KVM/extender receivers
• Integrating audio alongside video and USB signals in AV and control room setups
• Centralising equipment control using AdderView CATx switches and AdderLink receivers

When it may not be suitable

This module is intended specifically for use with ADDER CATx extension systems and compatible Adder receivers or switches; it is not a standalone video converter for direct monitor connection without the corresponding CATx receiver or switch. It does not replace native network or IP-based video distribution systems and is not designed to extend video beyond the supported 300 metre distance over CAT5/5e/6 cabling.

Key specifications

• Video interface: DisplayPort (computer-side)
• Peripheral interfaces: USB (for keyboard/mouse and USB devices) and 3.5 mm audio
• Extension medium: CAT5, CAT5e or CAT6 cable
• Maximum extension distance: up to 300 metres (with compatible Adder receivers/switches)
• Compatibility: Designed for use with AdderView CATx KVM switches and AdderLink X2 Silver / X200 receivers
• Form factor: Compact CAM module for connection at the computer end

How to use

Connect the CATX-DP-USBA module to the computer's DisplayPort video output, a USB port for peripheral and KVM control, and the audio output if required. Use CAT5/5e/6 cabling to link the module to an AdderView CATx switch or a compatible AdderLink receiver located up to 300 metres away. At the remote end, connect the receiver to the display, keyboard, mouse and speakers. Ensure the connected Adder devices are powered and configured according to their documentation; the CATX module itself acts as the computer-side access module in the extension system.

What to consider before purchase

• Ensure you have compatible AdderView CATx switches or AdderLink receivers (X2 Silver or X200) at the remote end
• Verify your cabling: use CAT5, CAT5e or CAT6 in good condition and check maximum run lengths to maintain signal quality
• Confirm the computer has a DisplayPort output plus available USB and audio ports for connection
• Plan power and mounting for the remote receivers and central KVM equipment

Usage recommendations

For best results, use high-quality shielded CAT5e or CAT6 cable and test cable runs for continuity before installation. Pair the CATX-DP-USBA with supported Adder receivers or AdderView CATx switches and follow Adder installation guides to ensure reliable video and peripheral performance over the 300 metre maximum distance.