LED Power Supply ECOLIGHT2 EC79765 120W — Constant Voltage LED Driver for Lighting Systems

ECOLIGHT2 EC79765 is a 120W constant-voltage LED power supply designed to deliver a stable 12V or 24V output (depending on model variant) to LED strips, modules and lighting fixtures. It is intended for indoor and enclosed installations where a dedicated 120W LED driver is required for residential, commercial or architectural lighting systems. The housing and design allow integration into junction boxes or lighting enclosures while providing regulated output and built-in protections for reliable continuous operation.

Advantages

The ECOLIGHT2 120W LED power supply provides consistent voltage regulation to maintain uniform light output across connected LED loads and reduce flicker. Its rated power capacity supports medium to large LED installations without the need for multiple smaller drivers. Integrated protection features such as overload, short-circuit and overtemperature protection help safeguard both the driver and connected LEDs. The compact form factor and enclosed design make it suitable for concealed mounting in ceilings, cabinets or electrical enclosures.

Suitable for

• LED strip installations in residential kitchens, living areas or under-cabinet lighting
• Architectural accent lighting and coves requiring a stable constant-voltage source
• Commercial signage, display cases and retail illumination using 12V/24V LED modules
• Lighting retrofit projects where a single 120W driver replaces multiple smaller supplies

When it may not be suitable

This model is a constant-voltage driver and therefore not suitable for directly driving LED fixtures that require constant-current operation or have built-in current regulation expecting a different supply type. It may not be appropriate for outdoor exposed installations unless installed inside a suitable weatherproof enclosure, as it is designed for indoor and enclosed use. Verify the required output voltage (12V or 24V) of your LED products before connecting to ensure compatibility.

Key specifications

• Output power: 120 W (continuous)
• Output type: constant-voltage compatible with 12V or 24V LED loads (confirm variant)
• Input: mains AC input suitable for standard household/commercial supply
• Protections: overload, short-circuit, overtemperature protection
• Installation: enclosed mounting for indoor use, intended for integration in junctions or housings

How to use

Install the LED power supply inside a suitable electrical enclosure or junction box following local electrical codes. Ensure the mains supply is disconnected before wiring. Connect the mains AC input to the supply’s input terminals and connect the LED load to the constant-voltage output, observing correct polarity. Distribute the 120W output across LED strips or modules within the driver’s power limit and avoid exceeding the rated wattage. After wiring, restore power and verify the LEDs operate with stable brightness and without flicker. If the driver enters protection mode, disconnect power and inspect the load for short circuits or overload conditions.

What to consider before purchase

• Confirm whether your LED products require 12V or 24V constant-voltage supply and select the matching variant
• Sum the wattage of all connected LED loads to ensure the total does not exceed 120W
• Plan for indoor/enclosed installation and provide adequate ventilation to avoid overheating
• Check compatibility with dimmers or controllers if dimming or remote control is required

Usage recommendations

For reliable operation, use the ECOLIGHT2 120W driver to power LED loads that collectively remain below the 120W rating and match the driver’s output voltage. Mount the unit in a ventilated but enclosed space away from direct moisture, and verify wiring connections and polarities before powering. When integrating dimming, choose compatible dimmer types and follow the dimmer manufacturer’s wiring guidelines.