Submersible Pump Einhell GE-DP 7935 N-A LL ECO 790 W 0.9 bar 19000 l/h

The Einhell Dirty Water Pump GE-DP 7935 N-A LL ECO is a versatile submersible pump for draining ponds, excavation pits, flooded basements and other water-accumulation areas. With a 790 W motor, ECO-Power energy-efficient design and a maximum flow rate up to 19,500 l/h at a delivery height up to 9 m (0.9 bar), the combi pump handles clean water and wastewater with solids up to 35 mm. The pump features an AquaSensor for adjustable trigger levels, dry-run protection, a robust stainless-steel housing and a universal adapter for standard hoses.

Advantages

The pump offers adjustable flat suction down to a 1 mm residual water level in clear-water mode and selectable suction/particle settings (1 / 15 / 25 / 35 mm) for dirty-water operation. ECO-Power technology provides high performance with low energy consumption. Dry-running protection prevents motor damage by ensuring operation only when submerged. The stainless-steel housing and high-quality mechanical seal increase durability, while an ergonomic carrying handle, suspension eyelet and cable winder improve handling and storage. A quick connector and a 360°-rotating universal adapter with non-return valve allow fast, tool-free hose changes.

Suitable for

• Draining flooded basements and cellars
• Emptying ponds and pools
• Removing water from excavation pits and construction sites
• Irrigation and garden water management

Key specifications

• Power: 790 W
• Maximum flow rate: up to 19,500 l/h (product data lists 19,000 l/h nominal)
• Maximum delivery height: up to 9 m (0.9 bar)
• Particle handling: up to 35 mm (dirty water mode)
• Flat suction: down to 1 mm residual water (clear water mode)
• Modes: clean water and dirty water with selectable suction levels (1 / 15 / 25 / 35 mm)
• Housing: stainless steel
• Protection: dry-run protection
• Accessories: quick connector, universal adapter for 25/32 mm hoses and 33.3 mm (G 1") external threads

How to use

Place the pump on a stable surface or lower it into the water using the suspension eyelet and rope. Select the appropriate mode and suction level via the rotary setting: use the 1 mm setting for flat suction in clear water and higher settings (15/25/35 mm) for dirty water depending on particle size. Connect a hose using the quick connector and universal adapter; the adapter rotates 360° to prevent tipping. Ensure the pump is submerged to the required level for operation and that the dry-run protection is not activated.

Usage recommendations

For long service life, avoid running the pump dry, remove large debris from the area before pumping when possible, and choose the suction level appropriate to water clarity and particle size. Store the pump dry and wind the cable neatly on the cable winder after use.