Einhell TC-RH 28 3F 950 W SDS Plus

The Einhell TC-RH 28 3F 950 W SDS Plus is a corded rotary hammer designed for drilling, hammer drilling and chiselling tasks. Equipped with a pneumatic percussion mechanism and an SDS-Plus semi-automatic chuck, it delivers an impact energy of up to 3.5 J and a maximum idle speed of 990 RPM. With an input power of 950 W and an AC voltage range of 220–240 V, the tool drills concrete up to 28 mm in diameter and features a 2 m power cable, a solid-metal adjustable depth stop and an ergonomic housing with Softgrip surfaces. Supplied in a transport and storage case, the rotary hammer is built for repeated heavy-duty use in home, workshop and renovation projects.

Advantages

The rotary hammer combines three functions—drilling, hammer drilling and chiselling with rotation stop—in one tool, reducing the need to change equipment for different tasks. The pneumatic impact mechanism provides consistent power for drilling into concrete and for chiselling work while finely adjustable speed electronics allow control for delicate materials. A robust semi-automatic SDS-Plus chuck and solid-metal depth stop enable fast bit changes and precise hole depths. Ergonomic Softgrip surfaces and a securely ribbed auxiliary handle support comfortable and stable handling during extended use. The tool is supplied in a practical case for convenient transport and storage.

Suitable for

• Drilling holes in concrete, brick and masonry up to 28 mm diameter
• Hammer drilling for anchor and dowel installation
• Chiselling and light demolition with rotation stop
• Renovation and construction work in homes and workshops
• Tasks requiring precise drilling depth and controlled speed

Key specifications

• Functions: drilling, hammer drilling, chiselling with rotation stop
• Input power: 950 W (AC)
• Voltage: 220–240 V AC
• Maximum impact energy: 3.5 J
• Maximum idle speed: 990 RPM
• Maximum drilling diameter in concrete: 28 mm
• Chuck type: SDS-Plus semi-automatic
• Adjustable solid-metal depth stop for precise drilling
• Pneumatic percussion mechanism for efficient impacts
• Ergonomic handle with Softgrip and ribbed auxiliary handle
• Cable length: 2 m
• Weight: 4.77 kg
• Colour: black and red

How to use

Before use, check the mains voltage and inspect the power cable for damage. Fit the appropriate SDS-Plus drill bit or chisel into the semi-automatic chuck until it engages, and set the continuous metal depth stop to the required drilling depth. Select the operating mode (drilling, hammer drilling or chiselling with rotation stop) and adjust the speed using the electronic control to match the material. Hold the tool firmly with the main and auxiliary handles, start the machine and apply steady pressure; allow the pneumatic percussion mechanism to do the work rather than forcing the bit. After completing the work, switch off and unplug the tool, allow moving parts to stop, then remove the bit and store the tool in its transport case.

Usage recommendations

Use appropriate personal protective equipment including eye protection, hearing protection and dust mask when drilling or chiselling concrete and masonry. For precise anchor or dowel installation, perform a test hole in scrap material to confirm speed and depth settings. Keep the ventilation slots free of dust and clean the SDS-Plus shank regularly to maintain reliable bit changes and prolong tool life.