Fitting EK Water Blocks Torque Double Rotary Offset 28 — Brass, Black, Height 33 mm

EK-Quantum Torque Double Rotary Offset 28 is a brass rotary adapter designed for custom liquid cooling loops. Finished in satin black, this male+female threaded offset fitting provides a 28 mm connection spacing and a total height of 33 mm. It features two independent joints with separate rotating mechanisms and tactile clicks every 45 degrees to help precisely position tubing. The fitting is sealed with NBR O-rings and can be tightened from the top with a hex key when knurling is inaccessible. It is compatible with EK-Matrix7 standard components and visually matches the EK-Quantum Torque fittings and adapters.

Advantages

The double rotary design allows both offsetting and angle adjustment between port and tubing, replacing multiple older parts (rotaries angled 45° and 90° plus a 7 mm MF extender). CNC-machined brass construction with a satin black finish provides durability and consistent appearance. NBR O-ring sealing ensures leak-resistant connections. Mid-rotation clicks aid repeatable alignment, and the option to tighten with a hex key improves accessibility during installation.

Suitable for

• Aligning hard tubing to distribution plates on GPU and CPU water blocks
• Offsetting parallel or perpendicular tubes in compact or constrained builds
• Setups following the EK-Matrix7 standard, including Vector² GPU water blocks

Key specifications

• Material: CNC-machined brass
• Finish: Satin black
• Connection spacing: 28 mm
• Height: 33 mm
• Thread type: Male + female G1/4"
• Sealing: NBR O-rings

How to use

Install the fitting by threading it into the water block or distribution plate port using the appropriate G1/4" threads. Rotate the two independent joints to achieve the desired offset and angle; tactile clicks indicate every 45° increment, but the fitting may be used at any intermediate angle. If the knurling is not accessible, tighten the fitting from the top using a hex key. Verify O-ring seating and torque to ensure a secure, leak-free connection before filling the loop.

Usage recommendations

Use this fitting when you need precise alignment of hard tubing runs from GPU or CPU water blocks to a distro plate. Check compatibility with EK-Matrix7 standard components and confirm thread sealing; replace O-rings if damaged during installation.