Filters you can trust. Pure water every day.
In cart {{totalProductsCount}} item(s)
Your cart is empty
Water block ek water blocks 3831109906644 — transparent/white, 1/4" thread
EK-Quantum Velocity² D-RGB - AM5 White Edition is a socket-specific premium CPU water block designed for AMD AM5 socket and Ryzen 7000-series processors. The single-piece water block combines a nickel-plated 99.99% pure electrolytic copper cold plate with a CNC-machined acrylic top in a white/transparent finish, and it uses 1/4" connecting threads. The product is EK-Matrix7 compliant and features integrated D-RGB lighting with 17 addressable LEDs. The mounting system uses the patent-pending EK ExactMount adapted for AM5 motherboards.
The Velocity² features a socket-specific cooling engine that balances low hydraulic flow restriction with high cooling performance by matching cold plate geometry and mounting pressure to the AM5 IHS and die layout. The lathe-turned cold plate ensures precise contact and efficient heat transfer, while an asymmetric jet plate directs flow to critical areas. The integrated EK-ExactMount system simplifies installation by housing spring-loaded Torx screws inside the block and mating to the motherboard’s stock backplate. The EK-Matrix7 alignment standard eases loop planning and port alignment. Built with nickel-plated copper and a CNC acrylic top, the block offers reliable thermal performance and a clean white aesthetic.
Install the water block onto an AM5 motherboard that has the stock backplate factory-mounted. Align the block so the integrated spring-loaded Torx screws engage the motherboard backplate, then rotate the screws counter-clockwise to fasten. Connect 1/4" threaded fittings to the inlet and outlet ports and integrate the block into your liquid-cooling loop. Attach the 3-pin D-RGB connector to a +5V addressable RGB header on the motherboard, aligning the arrow on the connector with the header’s +5V marking. Follow normal leak-testing procedures before powering the system.
Use appropriate thermal interface material between the CPU IHS and the cold plate, ensure correct mounting pressure per motherboard guidelines, and perform a full leak test after connecting 1/4" fittings. For optimal RGB control, connect the D-RGB cable to a compatible 5V addressable header and configure lighting via the motherboard software.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}