Non-contact Voltage and Phase Tester electro base HT101, 12–1000V, LCD, Audible/Light Signals, LED
Short description
Cheapest delivery:
Unisend LV
Product information
Description
The electro base HT101 is a non-contact voltage and phase tester designed to detect alternating current voltages in the range of 12–1000 V. The tester combines a backlit LCD status display, a bright LED indicator and combined audible and light alarms to indicate the presence of voltage and to assist with phase detection. Compact and handheld, the HT101 is intended for quick checks of outlets, cables, junction boxes and electrical panels by electricians and maintenance personnel, providing a clear visual and acoustic response without requiring direct contact with live conductors.
Advantages
The tester offers non-contact detection for safer preliminary voltage checks and rapid verification of live conductors. Its LCD provides clear status information while the LED and audible signals allow detection in noisy or dim environments. Designed for a wide voltage range, the device can be used on low-voltage circuits as well as standard mains and higher-voltage installations. The compact, lightweight design supports single-handed operation and easy storage in a toolbox or pocket.
Suitable for
- Quick verification of live/unlive status of sockets and outlets
- Detection of phase presence in multi-phase installations
- Testing insulated cables and wiring without contact
- Rapid checks inside distribution boards and junction boxes
- Routine maintenance and safety inspections by electricians
Key specifications
- Detection range: 12–1000 V AC
- Display: backlit LCD for status indication
- Indicators: LED visual indicator plus audible and light alarms
- Detection method: non-contact capacitive sensing
- Power: battery powered, handheld form factor
- Operation: single-handed ergonomic design suitable for pocket carry
How to use
Switch on the HT101 and observe the LCD to confirm the device is operational. Place the tip of the tester close to the conductor, socket or terminal to be tested without making electrical contact. Move the tester along the cable or around the outlet while watching the LED and the LCD. When voltage is present the LED will illuminate and the device will emit audible and light signals; the LCD will display status information. For phase detection, follow the same procedure near each phase conductor to determine presence or absence of voltage. After testing, switch off the device and remove batteries if long-term storage is planned.
Usage recommendations
Use the HT101 only as a preliminary non-contact check; always follow established safety procedures and verify de-energisation with a suitable contact testing instrument before performing work. Ensure batteries are in good condition and the LCD/LED respond correctly prior to use. Do not rely on the tester in wet conditions or on heavily shielded cables where non-contact detection may be unreliable.

