Cable reel electro base FLRY automotive 2.50 mm² brown 100 m KM25BN.F100

Electro base FLRY automotive cable in brown, 2.50 mm² cross-section and 100 m length, is designed for low-voltage DC wiring in automotive and trailer applications. The single-core flexible conductor and heat-resistant insulation provide reliable electrical continuity and resistance to mechanical stress typical for vehicle harnesses. The product is suitable for repair, extension and new installations where a medium gauge flexible conductor is required.

Advantages

The FLRY construction combines flexibility with stable conductivity, enabling easier routing in tight spaces and through grommets. Brown insulation offers clear color-coding for circuit identification. The cable's insulation is formulated for resistance to oils, fuels and moderate temperature variations, reducing the risk of accelerated aging in vehicle environments. Its 2.50 mm² conductor cross-section balances current capacity and manageability for common DC circuits in cars and trailers.

Suitable for

• Automotive wiring and harness repairs
• Trailer and caravan DC circuits
• Extension of existing low-voltage vehicle cables
• Aftermarket electrical installations (lights, sensors, small accessories)

Key specifications

• Conductor type: single-core flexible copper
• Conductor cross-section: 2.50 mm²
• Insulation colour: brown
• Length: 100 m
• Voltage class: low-voltage DC automotive applications
• Typical operating temperature range suitable for vehicle use

How to use

Cut the required length and strip the insulation to expose the conductor using appropriate tools to avoid nicking the copper. For joints and terminations, use proper crimp connectors, soldering with heat-shrink insulation, or insulated screw terminals rated for the conductor size. Route the cable along existing harness paths where possible, securing it with clamps or cable ties and keeping it clear of sharp edges, moving parts and high-temperature sources.

Usage recommendations

Verify circuit load and fuse protection before installation to ensure the 2.50 mm² conductor is suitable for the intended current. Use sealed connectors in exposed locations and protect the cable with conduit or split loom where abrasion or chemical exposure is expected.