{{ totalProductsCount }}

In cart {{totalProductsCount}} item(s)

Total:
{{sum | formatAmount}}

Your cart is empty

header-product Nozzle 0.6 mm for Elegoo Neptune 4 / Neptune 4 Pro 3D printers — hardened steel, for 1.75 mm filament
12.49 €

Nozzle 0.6 mm for Elegoo Neptune 4 / Neptune 4 Pro 3D printers — hardened steel, for 1.75 mm filament

Nozzle 0.6 mm — Elegoo Neptune 4 / 4 Pro Photo 1
Keep track of price changes You keep track of price changes
Watch the price drop

Leave your address - as soon as the price of the product goes down, you'll know about it right away

You keep track of price changes

Nozzle 0.6 mm for Elegoo Neptune 4 / Neptune 4 Pro 3D printers — hardened steel, for 1.75 mm filament

{{email}}
You keep track of price changes

Nozzle 0.6 mm for Elegoo Neptune 4 / Neptune 4 Pro 3D printers — hardened steel, for 1.75 mm filament

{{email}}
{{selectedOffer && selectedOffer.price | formatAmount}}

Short description

Replacement 0.6 mm hardened steel nozzle designed for Elegoo Neptune 4 and Neptune 4 Pro 3D printers. Compatible with 1.75 mm filament, it provides increased wear resistance for abrasive materials and stable extrusion for medium-width line prints. Use it to print faster or stronger infill, larger layer heights, and models needing improved durability of the hotend tip.
Available for order: 11 pcs.
Warranty: 2 Years
SKU: 12091051
Manufacturer: Elegoo
free shipment

Cheapest delivery:

Venipak Locker LV

Pick-up points

Venipak Locker LV

Cost

1.89 €

Deliver

{{selectedOffer.parcelStationDeliveryString}}

Customer service center
2b. Kengaraga str., Riga, Latvia, LV-1063
14.07.2026 {{selectedOffer.officeDeliveryString}}
free
Courier Delivery Please note that in case of a large parcel additional delivery costs may apply!
17.07.2026 {{selectedOffer.courierDeliveryString}}
From 4.99 €
Parcel couriers
Venipak Locker LV / Latvijas Pasts pakomāts / Unisend LV / DPD Paku skapis / Omniva LV / Venipak Pickup LV / Latvijas Pasts nodaļa
17.07.2026 {{selectedOffer.parcelStationDeliveryString}}
From 1.89 €
payment
Payment Methods:
Bank transfer, Bank cards on-line, Apple Pay, Google Pay
Together cheaper
{{product.price | formatAmount}}
{{product.title}}
{{productBundle.reference.specialPrice | formatAmount}}
{{productBundle.title}}
{{productBundlePreviousPrice | formatAmount}}
{{productBundleSpecialPrice | formatAmount}}

You saving {{productBundleYouSave | formatAmount}}

Product information

Description

Nozzle 0.6 mm for Elegoo Neptune 4 / Neptune 4 Pro 3D printers — hardened steel, for 1.75 mm filament is a direct replacement hotend tip designed to fit Elegoo Neptune 4 and Neptune 4 Pro models. The 0.6 mm aperture allows for medium-width extrusion suitable for faster prints and stronger infill while the hardened steel construction increases wear resistance when printing abrasive filaments. This nozzle is sized for standard 1.75 mm filament and is intended to provide a stable flow and longer service life compared with standard brass nozzles when working with loaded or filled materials.

Advantages

The hardened steel material offers superior abrasion resistance compared with soft metal nozzles, reducing the rate of nozzle wear when using abrasive or composite filaments. The 0.6 mm diameter balances print speed and detail: it enables higher extrusion rates and larger layer heights for quicker, structural prints while maintaining acceptable surface quality. Compatibility with Elegoo Neptune 4 and Neptune 4 Pro ensures a straightforward replacement process and consistent nozzle-seat fit for these hotend geometries.

Suitable for

  • Printing with abrasive filaments such as carbon-filled, metal-filled or glow-in-the-dark compounds
  • Faster prototyping and structural parts requiring stronger infill
  • Models printed with larger layer heights where medium nozzle diameter is preferred
  • Users seeking longer nozzle life and less frequent nozzle replacement

Key specifications

  • Nozzle diameter: 0.6 mm
  • Filament diameter compatibility: 1.75 mm
  • Material: hardened steel (wear-resistant)
  • Intended printer models: Elegoo Neptune 4 and Neptune 4 Pro compatible hotends
  • Recommended use: medium-width extrusion, higher flow rates, and increased abrasion resistance

How to use

Before installation, heat the hotend to printing temperature to allow safe removal of the existing nozzle and reduce the risk of filament breaking inside the throat. Use appropriate tools to unscrew the old nozzle and carefully install the hardened steel nozzle by hand until it seats, then tighten to the manufacturer's recommended torque using a suitable wrench; avoid over-tightening. After installation, perform a temperature tower and extrusion calibration to adjust flow rate and re-tune print settings for the 0.6 mm diameter and the specific filament in use.

Usage recommendations

When switching from a smaller-diameter nozzle, increase layer height and extrusion width settings in your slicer incrementally and recalibrate retraction and print temperature. Hardened steel has different thermal conductivity than brass, so verify first-layer adhesion and fine-tune printing temperature; use slower initial layers if required. Regularly inspect the nozzle tip for signs of wear and clean with recommended methods for hardened steel to ensure consistent extrusion quality.

Description

Machine translation. Load original

Similar products

{{product.title}} Show details Hide details

{{highlightedFeature.featureTitle}}:

{{getProductFeatureValueById(product, highlightedFeature.featureId)}}

{{product.price | formatAmount}}
Might be useful
{{product.manufacturerName}}
{{product.categoryName}}
{{product.title}}
{{product.specialPrice}}
{{product.price}}

Customer reviews

Customer questions

FAQ

How much does the Nozzle 0.6 mm — Elegoo Neptune 4 / 4 Pro cost, and is it available for purchase?

The price is 12.49 € (valid at the time of publication and already includes all taxes). The item is available for order — 11 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 14.07.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

What payment options are available?

AiO.lv offers several payment methods: Bank transfer, Bank cards on-line, Apple Pay, Google Pay. All transactions are 100% secure and encrypted.

Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

What is the warranty period?

All Elegoo products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Elegoo service centers and through AiO.lv

Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. We will assist with consultation, warranty claim processing, and coordination with certified service centers.
warranty
14-Day Return Policy We are confident in our quality, but if the purchase doesn’t fit — you have 14 days to return the product with peace of mind.
shipping
Fast Delivery Get your orders as quickly as possible — right to your door, parcel lockers, or pickup points across Latvia and the EU.
payment
Secure Payment Pay the way you prefer: cash, VISA, MasterCard, Apple Pay, Google Pay, bank transfer, or 0% installment plan.
warranty
Quality Since 2008 AiO.lv has been on the market for over 18 years and has earned trust — with more than 6000 genuine positive reviews on Google.